We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular SODIMM module with black chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 CL17 260-PIN SODIMM POSIFLEX XT-6515 memory upgrade

SKU CH-QNH6-NT018

16GB DDR4 2400 CL17 SODIMM module built for the POSIFLEX XT-6515 terminal

  • Total capacity16 GB
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL17
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 16 GB DDR4 2400 MHz boosts POS terminal responsiveness
  • CL17 latency and 1.2 V operation keep the fanless XT-6515 running cool
  • 260-pin SODIMM form factor fits the JIVA high-end chassis exactly
  • Single 16 GB module (2Rx8) simplifies installation with no pairing required
  • Built with Samsung, Micron or Hynix chips for enterprise-grade reliability

POSIFLEX XT-6515 memory upgrade

This 16GB DDR4 SODIMM is built for the POSIFLEX XT-6515 JIVA fanless point-of-sale terminal. It installs in the single 260-pin slot to give the system a full 16GB of working memory. The module targets IT teams that maintain POS fleets and need a validated, system-specific upgrade.

Replaces the factory 4GB or 8GB stick

Moving from a lower-capacity module to this 16GB 2Rx8 part removes the memory ceiling that forces the OS to swap during busy checkout periods. The jump is worth it when transaction logs, local databases and peripheral drivers run simultaneously on the terminal.

Sustained load on a fanless terminal

Rated at 1.20V with CL17 timing, the module runs within the thermal envelope of a sealed chassis without a heat spreader. Major-brand Samsung, Micron or Hynix chips are stress-tested under continuous load so the terminal stays responsive through extended trading hours.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $64.99
Cheaper than about 74% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $4.06 per GB
Cheaper than about 84% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 2400 MHz Non-ECC Unbuffered SODIMM
Part numberMS19200-628K1
Total capacity16 GB
Product type260-PIN DDR4 SODIMM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL17
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items16 GB (1 × 16 GB) DDR4 2400 MHz PC4-19200 2Rx8 1.2 V CL17 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the 260-pin SODIMM fit the POSIFLEX XT-6515 memory slot?

Yes, the 260-pin DDR4 SODIMM form factor matches the POSIFLEX XT-6515 terminal slot exactly.

What is the correct orientation step when installing this module?

Align the notch on the 260-pin edge connector with the key in the slot, press firmly until both side clips snap shut.

Will the 1.20V DDR4 module need replacement for voltage reasons?

No, 1.20V is the standard DDR4 operating voltage and the module is built for continuous operation in the terminal.

More in Model-Specific Memory Upgrades

Similar items