We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 CL17 2Rx8 1.2V 260-PIN SODIMM POSIFLEX RT-6016 memory upgrade

SKU CH-K3MD-05GM2

16 GB DDR4 2400 SODIMM with CL17 timing and 1.2 V operation for POSIFLEX RT-6016 terminals

  • Total capacity16 GB
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL17
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 16GB DDR4 SODIMM expands POSIFLEX RT-6016 capacity
  • 2400MHz PC4-19200 speed matches terminal specification
  • CL17 latency at 1.2V reduces power draw
  • 2Rx8 rank with major OEM chips ensures stability
  • 260-pin non-ECC unbuffered design fits POSIFLEX slot

POSIFLEX RT-6016 DDR4 SODIMM upgrade

This 16GB DDR4 module is built specifically for the POSIFLEX RT-6016 stylish slim terminal. It targets IT professionals and system integrators who need a direct, validated memory replacement for point-of-sale or kiosk deployments. The single-module design fills one slot and matches the platform’s native DDR4 specification.

Unbuffered 260-pin build with major-brand chips

The stick uses a standard 260-pin SODIMM edge connector and runs at 1.20V without a heat spreader, keeping the profile low enough for slim enclosures. It is assembled with Samsung, Micron or Hynix components in a 2Rx8 unbuffered non-ECC layout, so it installs like any ordinary laptop module and requires no special tools or configuration.

DDR4 2400 CL17 limits bandwidth to PC4-19200

The DDR4 2400 interface caps throughput at the PC4-19200 data rate, and the CL17 latency fixes timing overhead for this speed grade. Systems that demand higher memory clocks, lower latency or ECC protection cannot be satisfied by this module, and terminals with only one SODIMM slot gain no further expansion headroom.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $68.99
Cheaper than about 73% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $4.31 per GB
Cheaper than about 82% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 2400 MHz Non-ECC Unbuffered SODIMM
Part numberMS19200-628K1
Total capacity16 GB
Product type260-PIN DDR4 SODIMM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL17
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items16 GB (1 × 16 GB) DDR4 2400 MHz PC4-19200 2Rx8 1.2 V CL17 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

What DDR4 speed and PC4 rating does this SODIMM use?

It runs at DDR4 2400 with a PC4-19200 rating, matching the memory controller speed supported by the POSIFLEX RT-6016 terminal.

What physical slot and pin count does this module require?

It uses a 260-pin DDR4 SODIMM slot, the standard socket found in the POSIFLEX RT-6016 slim terminal.

How is the module installed, and what step is often missed?

Power off the terminal, open the memory cover, insert the SODIMM at an angle until the gold contacts disappear, then press down firmly until both side clips click into place.

More in Model-Specific Memory Upgrades

Similar items