We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board DDR4 RDIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 ECC RDIMM 1Rx4 CL17 1.2V 288-Pin Dell PowerEdge FC430

SKU CH-BMYS-ZTD91

16 GB DDR4 2400 ECC registered RDIMM, CL17 1.2 V, single-rank 1Rx4, validated for Dell PowerEdge FC430 servers

  • Total capacity16 GB
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL17
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • ECC protection guards data integrity
  • Registered design stabilises heavy server workloads
  • 16 GB capacity expands Dell PowerEdge FC430 memory
  • DDR4 2400 speed matches system specifications
  • 2 V operation reduces power draw

Dell PowerEdge FC430 compatible DDR4 ECC RDIMM

This registered DDR4 module is built for the Dell PowerEdge FC430 server platform. It provides 16 GB of ECC memory in a single 288-pin DIMM. System administrators upgrading blade density or replacing failed sticks can install it without changing existing memory configurations.

16 GB single-rank capacity at DDR4 2400 CL17

The module runs at 2400 MT/s with CAS latency 17 and 1.20 V. One 1Rx4 rank fills a single slot, leaving remaining channels open for further expansion. Workloads that exceed 16 GB per channel will require additional DIMMs to avoid swapping.

Ships as a single tested 16 GB stick

The package contains one 16 GB RDIMM validated for the FC430. No heat spreader, cables, software licences or mounting hardware are included. Installation follows the server’s standard memory-replacement procedure documented in the Dell service manual.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $81.99
Cheaper than about 70% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $5.12 per GB
Cheaper than about 75% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineDell Server/Workstation Compatible Series Memory
Model nameDell DDR4 2666 MHz ECC RDIMM Registered Server Memory
Part numberMR19200-614K1
Total capacity16 GB
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL17
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank1Rx4
Power
Rated voltage1.2 V
Compatibility
Compatible systemsDell
In the box
Included items16 GB (1 × 16 GB) DDR4 2400 MHz PC4-19200 1Rx4 1.2 V CL17 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Will this 2400 MHz ECC RDIMM run alongside slower DDR4 modules already in my PowerEdge FC430?

Mixing speeds forces all channels to the slowest module; the server will clock everything down to the lowest installed speed.

How can I confirm the 1Rx4 registered module is detected at 2400 MHz with CL17 after installation?

Check the BIOS memory information page or run a tool such as CPU-Z to verify speed, rank, CAS latency and ECC status.

Does the single 16 GB stick ship with any extra brackets, cables or a heat spreader?

The package contains only the 288-pin RDIMM itself; no heat spreader, brackets or cables are included.

More in Model-Specific Memory Upgrades

Similar items