We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 SODIMM POSIFLEX RT-6116 memory upgrade

SKU CH-T83X-FP9G1

16 GB DDR4 2400 SODIMM for POSIFLEX RT-6116, CL17, 1.2 V, 260-pin, non-ECC

  • Total capacity16 GB
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL17
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 16 GB capacity boosts POS terminal multitasking
  • DDR4 2400 MHz speed matches system specification
  • CL17 latency at 1.2 V for stable operation
  • 260-pin SODIMM form factor fits POSIFLEX RT-6116
  • Major OEM chips ensure reliable compatibility

POSIFLEX RT-6116 memory upgrade

This 16 GB DDR4 2400 SODIMM is built specifically for the POSIFLEX RT-6116 terminal. It uses a 260-pin unbuffered non-ECC layout at 1.20 V to match the platform's memory controller. The module targets technicians who need a direct-fit replacement without configuration changes.

Sustained workload stability

Each stick is stress-tested under load using major OEM Samsung, Micron or Hynix chips before it ships. The 2Rx8 organisation and CL17 timing keep latency predictable during long transaction windows. Operation stays within the standard DDR4 voltage envelope so thermals remain consistent over extended shifts.

Tool-free slot access

The SODIMM form factor slides into the terminal's memory door without removing the main chassis. Align the notch on the 260-pin edge connector, press until the side clips engage, then replace the cover. The only common error is inserting the module at an angle, which can bend the gold contacts and prevent the system from posting.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $66.99
Cheaper than about 73% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $4.19 per GB
Cheaper than about 83% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 2400 MHz Non-ECC Unbuffered SODIMM
Part numberMS19200-628K1
Total capacity16 GB
Product type260-PIN DDR4 SODIMM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL17
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items16 GB (1 × 16 GB) DDR4 2400 MHz PC4-19200 2Rx8 1.2 V CL17 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the 1.20V DDR4 SODIMM add noticeable heat or fan noise when the POSIFLEX RT-6116 runs continuously?

The module operates at the standard 1.20V DDR4 voltage with no heat spreader, so it adds minimal thermal load and no active cooling of its own; system fan behaviour stays governed by the terminal's own firmware.

What must the POSIFLEX RT-6116 already have for this 260-PIN CL17 stick to be recognised?

An available DDR4 SODIMM slot that accepts 2Rx8 PC4-19200 non-ECC unbuffered memory and a BIOS that supports 16 GB single-rank modules at 2400 MT/s.

Will this 16 GB PC4-19200 module down-clock reliably if the RT-6116 currently runs slower DDR4?

Yes, DDR4 SODIMMs are backward compatible; the stick will run at the highest speed the terminal's memory controller allows, up to its rated 2400 MT/s CL17.

More in Model-Specific Memory Upgrades

Similar items