Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4 2666 ECC UDIMM with CL19 latency and 1.2 V operation for Synology RS3618xs NAS
This NEMIX RAM module is a 16GB DDR4 2666 ECC UDIMM built specifically for the Synology RackStation RS3618xs NAS. It operates at 1.2V with CL19 latency and uses a 2Rx8 rank configuration on a 288-pin unbuffered PCB. The part number is ME21300-628K1.
Buyers who need registered or load-reduced DIMMs cannot use this unbuffered module. Systems that require a different DDR generation, a non-ECC stick, or a capacity other than 16GB per slot should look elsewhere.
The decisive spec is the 2Rx8 288-pin unbuffered ECC UDIMM form factor matched to the Synology RS3618xs qualified vendor list. If the NAS calls for this exact configuration the module will install and run without compatibility issues.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | Synology Compatible Series NAS Memory |
| Model name | Synology DDR4 2666 MHz ECC Unbuffered UDIMM |
| Part number | ME21300-628K1 |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 ECC UDIMM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Synology |
| In the box | |
| Included items | 16 GB (1 × 16 GB) DDR4 2666 MHz PC4-21300 2Rx8 1.2 V CL19 288-PIN ECC Unbuffered UDIMM |
The module operates at 2666 MT/s with CL19 latency, delivering the rated PC4-21300 bandwidth when the system runs the memory at its specified speed.
The 288-pin DDR4 ECC unbuffered DIMM slot caps transfer rates to the DDR4 2666 standard and provides single-bit error correction without registered buffering overhead.
It fits a standard 288-pin DDR4 UDIMM slot, draws 1.2 V, has no heat spreader, and uses a dual-rank 2Rx8 chip layout that matches the system's memory architecture.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?