We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 ECC RDIMM 2Rx8 CL21 1.2V 288-Pin Dell PowerEdge FC640

SKU CH-PMZ1-Q99TJ

16GB DDR4 2933 ECC registered DIMM with CL21 latency and 1.2V operation for Dell PowerEdge FC640 servers

  • Total capacity16 GB
  • Rated speedDDR4 2933 (PC4 23400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL21
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • 16 GB DDR4 2933 MHz boosts server throughput
  • ECC registered design protects data integrity
  • 2Rx8 dual-rank layout maximises memory density
  • 20 V operation lowers power draw
  • Validated for Dell PowerEdge FC640 compatibility

Dell PowerEdge FC640 compatible memory

This 16 GB DDR4 2933 module is built for the Dell PowerEdge FC640 server. It delivers ECC registered operation for data integrity in enterprise workloads. The single DIMM format suits capacity upgrades or replacement in qualified systems. IT teams maintaining this platform can install it without proprietary Dell part sourcing.

Registered ECC RDIMM build

Registered buffering reduces electrical load on the server memory controller for stable operation at 2933 MT/s. The 288-pin DDR4 RDIMM keying prevents insertion into unbuffered or consumer slots. ECC circuitry corrects single-bit errors to protect critical data. No heat spreader is fitted, matching the original Dell thermal design for this chassis.

2933 MT/s CL21 2Rx8 specification

The module runs at DDR4 2933 (PC4-23400) with CAS latency 21 at 1.2 V. Dual-rank 2Rx8 organisation provides density for the FC640 memory architecture. Systems requiring a different speed grade, rank configuration or voltage will not operate correctly with this part.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $122.99
Cheaper than about 65% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $7.69 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineDell Server/Workstation Compatible Series Memory
Model nameDell DDR4 2933 MHz RDIMM Registered Server Memory
Part numberMR23400-628K1
Total capacity16 GB
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 2933 (PC4 23400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL21
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsDell
In the box
Included items16 GB (1 × 16 GB) DDR4 2933 MHz PC4-23400 2Rx8 1.2 V CL21 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

What does the DDR4 2933 (PC4-23400) rating mean for maximum data rate?

The module runs at 2933 MT/s, giving a peak bandwidth of PC4-23400; the server memory controller will not exceed this speed.

Will this 288-pin RDIMM fit the Dell PowerEdge FC640 memory slots?

Yes, the 288-pin DDR4 RDIMM form factor matches the FC640 DIMM slots; the registered design and 2Rx8 organisation are supported by that platform.

How do I install the module, and what step is often missed?

Power off the server, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then verify in BIOS that the 16 GB appears at 2933 MT/s with ECC active.

More in Model-Specific Memory Upgrades

Similar items