We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 260-Pin SODIMM POSIFLEX TK-2152 memory upgrade

SKU CH-1QRC-ERZA3

16 GB DDR4 3200 CL22 SODIMM module built for the POSIFLEX TK-2152 kiosk

  • Total capacity16 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 16 GB capacity boosts kiosk responsiveness
  • DDR4 3200 MT/s speed matches POSIFLEX TK-2152 spec
  • CL22 latency keeps data flowing smoothly
  • 2 V operation reduces power draw and heat
  • 260-pin SODIMM fits the Stellar Series slot exactly

System-Specific DDR4 SODIMM

This 16GB DDR4 3200 module is built exclusively for the POSIFLEX TK-2152 Stellar Series kiosk. It targets IT teams maintaining point-of-sale fleets that require a direct-fit, validated upgrade without compatibility guesswork. The single 16GB stick fills one slot and raises total memory in a single step.

JEDEC-Standard Unbuffered Design

The stick uses major-brand DRAM chips at 1.2V with CL22 timings and a 2Rx8 organisation. No heat spreader is fitted, keeping the low-profile height required by the kiosk chassis. The 260-pin SODIMM edge connector matches the factory socket exactly, so installation follows the standard latch-and-click procedure in minutes.

Replaces Lower-Capacity Factory Modules

Upgrading from 4GB or 8GB original equipment eliminates swapping bottlenecks when multiple POS applications run together. The jump is worth it when transaction logs, inventory lookups and peripheral drivers compete for the same limited address space. Buyers needing ECC protection or registered DIMMs for server boards cannot use this module.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $86.99
Cheaper than about 69% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $5.44 per GB
Cheaper than about 71% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 3200 MHz Non-ECC Unbuffered SODIMM
Part numberMS25600-628K1
Total capacity16 GB
Product type260-Pin DDR4 SODIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items16 GB (1 × 16 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the DDR4 3200 PC4-25600 interface cap at CL22 latency?

Yes, this module runs at DDR4 3200 with a CAS latency of CL22, so the effective timing ceiling is CL22 at the rated speed.

What physical slot and form factor does the 260-pin SODIMM need?

It requires a standard 260-pin DDR4 SODIMM slot, the type used in the POSIFLEX TK-2152 kiosk.

How is the module installed and what step is often missed?

Power off the kiosk, open the memory cover, align the notch on the 260-pin edge connector, press firmly until the side clips click, then verify 16 GB appears in BIOS.

More in Model-Specific Memory Upgrades

Similar items