We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 UDIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 1.2V UDIMM for THINKMATE XF6-14X1

SKU CH-65ET-6PAHM

16 GB DDR4 3200 CL22 2Rx8 1.2 V UDIMM built for THINKMATE XF6-14X1 workstations

  • Total capacity16 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 16 GB DDR4-3200 boosts workstation throughput
  • CL22 latency at 1.2 V keeps power draw low
  • 2Rx8 dual-rank layout fills a single DIMM slot
  • 288-pin UDIMM fits ThinkMate XF6-14X1 without adapters
  • Major OEM chips stress-tested for enterprise stability

NEMIX RAM 16GB DDR4 3200 for Thinkmate XF6-14X1

This NEMIX RAM module provides 16GB of DDR4 3200 memory in a single 288-pin UDIMM. It runs at 1.20V with CL22 latency and a 2Rx8 rank configuration. The memory uses major OEM chips from Samsung, Micron or Hynix and is validated for the Thinkmate XF6-14X1 workstation. No heat spreader is included.

Who this suits and who should look elsewhere

This module suits owners of a Thinkmate XF6-14X1 workstation needing a 16GB DDR4 3200 upgrade. It is non-ECC and unbuffered so it will not work in systems that require registered or ECC memory. Buyers who need error-correcting code support or registered DIMMs should look elsewhere.

What the package contents change

The package contains one 16GB UDIMM and nothing else. No software, cables or additional accessories are bundled. The memory arrives ready to install in a compatible motherboard slot.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $103.99
Cheaper than about 67% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $6.50 per GB
Cheaper than about 61% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTHINKMATE Server/Workstation Compatible Series Memory
Model nameTHINKMATE DDR4 3200 MHz Non-ECC Unbuffered UDIMM
Part numberMD25600-628K1
Total capacity16 GB
Product type288-Pin DDR4 UDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTHINKMATE
In the box
Included items16 GB (1 × 16 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

Does my THINKMATE XF6-14X1 need a free 288-pin DDR4 UDIMM slot to accept this 16GB module?

Yes, the module uses the standard 288-pin DDR4 UDIMM form factor, so an available DDR4 UDIMM slot on the XF6-14X1 motherboard is required for installation.

Will this 3200 MHz CL22 2Rx8 module run at its rated speed if I keep slower DDR4 sticks in the other slots?

The system will typically downclock all modules to the speed of the slowest installed stick, so this 3200 MHz module would run at the lower frequency of the older modules.

How can I confirm the module is recognised at 3200 MHz with CL22 timings after I install it?

Check the memory speed and CAS latency in the BIOS setup or use a tool such as CPU-Z to verify the module reports 3200 MHz and CL22 timings.

More in Model-Specific Memory Upgrades

Similar items