We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM memory module with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-PIN SODIMM POSIFLEX EK-1552 memory upgrade

SKU CH-XTKT-CQVA1

16 GB DDR4-3200 SODIMM module rated CL22 at 1.2 V for POSIFLEX EK-1552 kiosks

  • Total capacity16 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 16 GB DDR4 3200 MHz boosts POS terminal responsiveness
  • CL22 latency at 1.2 V keeps power draw low
  • 2Rx8 dual-rank layout maximises memory density
  • 260-pin SODIMM fits POSIFLEX EK-1552 Mercury kiosks
  • Major OEM chips stress-tested for mission-critical stability

POSIFLEX EK-1552 SODIMM upgrade

This NEMIX RAM module delivers 16GB of DDR4 memory at 3200MHz for the POSIFLEX EK-1552 Mercury Series kiosk. It operates at 1.2V with CL22 latency and a 2Rx8 organisation. The 260-pin SODIMM form factor fits the system's memory slot directly. No heat spreader is included on the module.

Kiosk operators needing a single 16GB stick

Technicians maintaining POSIFLEX Mercury Series kiosks can install this part to restore or expand system memory. Builders working on other platforms or requiring ECC error correction should look at a different module. Systems that need registered or buffered memory are not supported by this unbuffered design.

2Rx8 rank configuration for the EK-1552

The module uses a 2Rx8 layout that matches the kiosk's memory controller requirements. Verify the service manual specifies this rank structure before ordering. A mismatched rank can prevent the system from posting or recognising the full capacity.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $86.99
Cheaper than about 69% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $5.44 per GB
Cheaper than about 71% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 3200 MHz Non-ECC Unbuffered SODIMM
Part numberMS25600-628K1
Total capacity16 GB
Product type260-Pin DDR4 SODIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items16 GB (1 × 16 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Should I choose the 16 GB single module or look for a dual-channel kit?

The listing supplies one 16 GB SODIMM. If the POSIFLEX EK-1552 has two slots, adding a second identical module later will enable dual-channel bandwidth.

What does the 3200 MHz rating deliver inside the EK-1552 kiosk?

The module runs at DDR4 3200 (PC4-25600) with CL22 latency at 1.2 V, giving the maximum JEDEC speed the platform’s memory controller supports.

Is the 260-pin SODIMM interface compatible with the POSIFLEX EK-1552?

Yes — the 260-pin DDR4 SODIMM form factor matches the slot used in the EK-1552 Mercury Series kiosk.

More in Model-Specific Memory Upgrades

Similar items