We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR4 UDIMM memory module 288 pins

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 ECC UDIMM memory upgrade

SKU CH-5XZ6-VDDCW

16 GB DDR4 3200 CL22 ECC UDIMM module adds error-correcting memory to compatible Micron systems

  • Total capacity16 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • ECC protection safeguards data integrity in critical workloads
  • 3200 MHz DDR4 speed delivers responsive system performance
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits standard server slots
  • Single-rank 1Rx8 layout supports dense memory configurations

Server ECC memory upgrade

This 16 GB DDR4 3200 module adds ECC error correction to compatible Micron platforms. The unbuffered UDIMM runs at 1.2 V with CL22 timing and a single-rank 1Rx8 organisation. It targets administrators who need reliable capacity increases for servers or workstations without registered memory support.

Straightforward DIMM installation

The 288-pin stick seats in any standard DDR4 UDIMM slot; no heat spreader means it fits tight clearance areas. Align the notch, press until the latches click, and the system recognises the module at 3200 MT/s. Problems usually arise only when mixing ranks or populating slots the board manual forbids for unbuffered ECC.

Ideal for Micron-compatible servers and workstations

Builders expanding ECC memory in supported Micron systems will find the correct voltage, pin count and rank layout here. Buyers who need registered RDIMM modules, higher frequencies, lower latencies or non-ECC memory for consumer boards should look at something else.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $136.99
Cheaper than about 63% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $8.56 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineMicron Server/Workstaion Compatible Series Memory
Model nameMicron DDR4 3200 MHz ECC Unbuffered UDIMM
Part numberME25600-618K1
Total capacity16 GB
Product type288-Pin DDR4 ECC UDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsMICRON
In the box
Included items16 GB (1 × 16 GB) DDR4 3200 MHz PC4-25600 1Rx8 1.2 V CL22 288-PIN ECC Unbuffered UDIMM

Questions about this item

How do I verify the module runs at 3200 MT/s with CL22 after installation?

Check the memory speed and CAS latency in BIOS or with a tool such as CPU-Z; it should show DDR4-3200 and CL22 at 1.20 V.

What comes in the package and do I need any extra parts?

The box contains one 16 GB 288-pin DDR4 ECC UDIMM; no cables, brackets or additional components are required.

Which capacity and rank should I pick for a Micron-compatible server?

Choose the 16 GB 1Rx8 module (part ME25600-618K1) to match the Micron MTA9ASF2G72AZ-3G2 specification.

More in Model-Specific Memory Upgrades

Similar items