Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4 3200 ECC UDIMM module built for SuperMicro M12SWA-TF servers
This 16GB DDR4 3200 module is built for the SuperMicro M12SWA-TF platform. It delivers error-correcting unbuffered memory for servers and workstations that require data integrity. The single 288-pin DIMM installs in minutes to expand system capacity.
ECC circuitry detects and corrects single-bit errors during continuous operation, preventing silent data corruption in long-running workloads. Unbuffered topology keeps latency low while the 1.2V supply limits thermal output. CL22 timing remains stable across extended sessions without throttling.
Replacing smaller DIMMs or non-ECC memory adds 16GB of protected capacity in one slot, ideal when the board has limited sockets. The jump is worthwhile for virtualisation hosts, NAS appliances or workstations that cannot tolerate memory errors. Builders needing registered RDIMM support or higher frequencies must choose a different module.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | SuperMicro Server/Workstation Compatible Series Memory |
| Model name | SuperMicro DDR4 3200 MHz ECC Unbuffered UDIMM |
| Part number | ME25600-628K1 |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 ECC UDIMM |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 16 GB (1 × 16 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 288-PIN ECC Unbuffered UDIMM |
The module operates at 1.2 V, the standard DDR4 voltage. Actual power draw depends on workload and the SuperMicro M12SWA-TF platform, but the low voltage helps limit heat during all-day operation.
The module is built to JEDEC DDR4 3200 PC4-25600 CL22 2Rx8 specifications. Installation follows the motherboard manual; no extra hardware is required beyond a compatible UDIMM slot.
The board will run all installed modules at the speed of the slowest stick. Mixing ranks or speeds is possible but may reduce stability; matching 3200 CL22 2Rx8 modules is recommended.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?