Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR5 kit (2 × 8 GB) running at 4800 MT/s, CL40, 1.1 V, non-ECC unbuffered 288-pin UDIMM validated for ThinkMate SB Grid-Standard workstations
This 16 GB kit contains two 8 GB unbuffered UDIMMs built for Thinkmate SB Grid-Standard workstations. The modules run at DDR5 4800 with CL40 latency at 1.10 V. They are non-ECC and use a standard 288-pin desktop form factor.
Samsung Micron or Hynix ICs are used depending on supply, all tested under load for stability. The bare PCB design keeps height low for dense chassis layouts. Dual-rank 1Rx8 organisation supports typical dual-channel population on compatible boards.
Confirm the exact Thinkmate SB Grid-Standard configuration before ordering because memory validation is system-specific. Ensure two adjacent UDIMM slots are free for the matched pair. No heat spreader means airflow clearance is minimal but check CPU cooler overhang.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | THINKMATE Server/Workstation Compatible Series Memory |
| Model name | THINKMATE DDR5 4800 MHz Non-ECC Unbuffered UDIMM |
| Part number | MD38400-818K2 |
| Total capacity | 16 GB (2 × 8 GB) |
| Product type | 288-Pin DDR5 UDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | THINKMATE |
| In the box | |
| Included items | 16 GB (2 × 8 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
The kit is rated DDR5 4800 PC5-38400, so it will run at up to 4800 MT/s when the platform supports that speed.
Yes, the 288-pin DDR5 UDIMM form factor matches the workstation slots and the modules have no heat spreader to interfere with tight spacing.
Power off, open the case, align each module notch with the slot key, press firmly until both retention clips click, then verify 16 GB appears in BIOS.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?