We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1.1V 288-pin UDIMM memory upgrade for ASUS ProArt Z890-CREATOR WiFi

SKU CH-EH97-G8CZ7

16 GB DDR5 5600 CL46 1.10 V UDIMM validated for the ASUS ProArt Z890-CREATOR WiFi motherboard

  • Total capacity16 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 16 GB DDR5 5600 boosts multitasking speed
  • CL46 latency keeps data flowing smoothly
  • 1 V operation lowers system power draw
  • 288-pin UDIMM fits the ASUS ProArt Z890-CREATOR WiFi
  • Single 16 GB module simplifies future expansion

16 GB DDR5 5600 UDIMM for ASUS ProArt Z890-CREATOR

This 16 GB DDR5 5600 module is built specifically for the ASUS ProArt Z890-CREATOR WiFi motherboard. It runs at 1.1 V with CL46 timing and uses a single-rank 1Rx8 layout. The 288-pin unbuffered non-ECC design fits the board's desktop memory slots without additional configuration.

Suits single-slot upgrades.

The module targets users adding 16 GB to a compatible ProArt Z890-CREATOR WiFi system. Builders who require error-correcting code memory or registered DIMMs for server or workstation platforms should look at a different memory type.

Deciding spec: 288-pin DDR5 5600 CL46 1.1 V

Match the motherboard's DDR5 slot, 5600 MT/s speed, CL46 latency, 1.1 V voltage and unbuffered non-ECC requirement. If any of these values differ from the board's specification the module will not operate correctly.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $207.99
Cheaper than about 58% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $13.00 per GB
Pricier than about 59% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-618K1
Total capacity16 GB
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsASUS
In the box
Included items16 GB (1 × 16 GB) DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM

Questions about this item

Should I choose the 16 GB module or add a second stick for dual-channel on the ASUS ProArt Z890-CREATOR WiFi?

The board supports dual-channel; adding a second identical 16 GB stick will double bandwidth while keeping DDR5 5600 CL46 1.10 V timings.

What does the 5600 MT/s rating deliver once installed in the ProArt Z890-CREATOR WiFi?

The module runs at DDR5 5600 (PC5-44800) with CL46 latency at 1.10 V, giving the rated throughput without manual tuning.

Does the 288-pin DDR5 UDIMM fit the ProArt Z890-CREATOR WiFi DIMM slots and what speed ceiling applies?

Yes — the 288-pin DDR5 UDIMM matches the board's DDR5 slots; the JEDEC ceiling is 5600 MT/s unless the BIOS enables higher profiles.

More in Model-Specific Memory Upgrades

Similar items