We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1.1V 288-Pin UDIMM MSI B650M Project Zero memory upgrade

SKU CH-7TTM-J6TTM

16 GB DDR5-5600 CL46 1.1 V 288-pin UDIMM built for MSI B650M Project Zero boards

  • Total capacity16 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeUnbuffered
  • Rated voltage1.1 V

Capacity 16GB

  • 16GB DDR5 module adds responsive capacity for demanding workloads
  • 5600 MT/s speed rating keeps data moving at PC5-44800 bandwidth
  • CL46 CAS latency delivers predictable timing for stable operation
  • 10V operating voltage reduces power draw and heat output
  • 288-pin UDIMM form factor fits MSI B650M Project Zero motherboards

16 GB DDR5 module for MSI B650M Project Zero

This 16 GB DDR5 5600 UDIMM is built to match the MSI B650M Project Zero motherboard. It targets desktop owners who want a straightforward capacity increase on a validated platform. The module is new, unbuffered and non-ECC, so it fits standard consumer DIMM slots without extra configuration.

Capacity and headroom at 5600 MT/s

A single 16 GB rank handles everyday multitasking, office suites and mainstream gaming at the rated 5600 MT/s speed. The CL46 latency and 1.1 V operation stay within JEDEC baseline limits, so the board runs it without manual tuning. Workloads that demand more than 16 GB or tighter timings will exceed what this stick can deliver.

Upgrade path from lower-capacity or slower DDR5

Replacing an 8 GB DDR5 module or a slower 4800 MT/s kit adds both capacity and bandwidth in one step. The jump is worthwhile when the system shows memory pressure in Task Manager or when the current kit forces the memory controller below 5600 MT/s. Builders needing ECC, registered buffers or speeds above 5600 MT/s should look elsewhere.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $217.99
Cheaper than about 58% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $13.62 per GB
Pricier than about 60% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineMSI Gaming Motherboard Compatible Series Memory
Model nameMSI DDR5 5600 MHz Non-ECC Unbuffered UDIMM
Part numberMD44800-618K1
Total capacity16 GB
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsMSI
In the box
Included items16 GB (1 × 16 GB) DDR5 5600 MHz PC5-44800 1Rx8 1.1 V CL46 288-PIN Non-ECC Unbuffered UDIMM

Other versions of this model

5 more in the same range

Questions about this item

Will this DDR5 5600 CL46 1.1 V UDIMM work in the same MSI B650M Project Zero board alongside older DDR5 modules I already own?

The module is validated for the MSI B650M Project Zero motherboard and runs at DDR5 5600 (PC5-44800) with CL46 timing at 1.1 V. Mixing kits can force the board to run all sticks at the slowest common speed and loosest latency, so full rated performance is not guaranteed with different modules installed.

How can I verify the stick is running at DDR5 5600 CL46 1.1 V after I install it?

Enter the system BIOS or use a tool such as CPU-Z to confirm the memory frequency reads 5600 MT/s, the CAS latency shows CL46 and the voltage is set to 1.1 V.

What comes in the package and do I need anything extra to install it?

The box contains one 16 GB 288-pin DDR5 UDIMM (part MD44800-618K1). No additional parts are required; the module installs directly into a compatible DDR5 DIMM slot on the motherboard.

More in Model-Specific Memory Upgrades

Similar items