We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 memory module, 288 pins, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1Rx8 1.1V UDIMM Dell Pro Max Micro

SKU CH-NM49-M3W96

A 16 GB DDR5 module running at 5600 MHz with CL46 latency and 1.1 V operation, built for the Dell Pro Max Micro desktop

  • Total capacity16 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 16 GB DDR5 5600 boosts system speed
  • CL46 latency keeps data flow responsive
  • 1 V operation reduces power draw
  • 288-pin UDIMM fits Dell Pro Max Micro
  • single 16 GB module simplifies upgrade

Dell Pro Max Micro memory upgrade

This 16 GB DDR5 module is built specifically for the Dell Pro Max Micro desktop. It delivers a single 16 GB stick at 5600 MHz with CL46 latency and 1.1 V operation. The unbuffered, non-ECC design matches the platform's standard memory controller.

Replacing slower or smaller DDR5

The jump is worth it when the system ships with a lower-capacity stick or a slower DDR5 speed grade. Moving to 16 GB at 5600 MHz removes a memory bottleneck for multitasking and keeps the memory subsystem in step with the processor's rated data rate. It does not address builds that need ECC, registered modules, or capacities beyond a single 16 GB UDIMM.

Fits the factory slot directly

The 288-pin UDIMM drops into the existing DDR5 slot without adapters or voltage changes. One module leaves any second slot free for a future matched pair. The lack of a heat spreader keeps the profile low for the Micro chassis. No extra power connectors, BIOS toggles, or cooling clearance are required beyond what the desktop already provides.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $195.99
Cheaper than about 59% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $12.25 per GB
Pricier than about 58% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-618K1
Total capacity16 GB
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsDell
In the box
Included items16 GB (1 × 16 GB) DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM

Questions about this item

Will the 288-pin DDR5 UDIMM fit the Dell Pro Max Micro motherboard slots?

The module is a standard 288-pin DDR5 UDIMM built to JEDEC dimensions, so it seats in the desktop DDR5 slots used by the Dell Pro Max Micro.

What is the correct way to seat the module and which step do people often miss?

Align the notch with the slot key, press down firmly until both retention clips click shut, and verify the clips are fully engaged — the step most often missed is confirming both clips have locked.

Does the 1.10V CL46 1Rx8 module need any firmware update or periodic re-seating later?

No firmware update is required; the module runs at standard 1.10V JEDEC settings and, once the retention clips are latched, it does not need re-seating under normal use.

More in Model-Specific Memory Upgrades

Similar items