We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 ECC UDIMM for ASUS ROG-STRIX-B650-A Gaming WiFi memory upgrade

SKU CH-63EG-69TR1

16 GB DDR5 5600 ECC UDIMM with CL46 timing at 1.1 V for ASUS ROG STRIX B650 motherboards

  • Total capacity16 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 16 GB DDR5 ECC UDIMM protects data integrity
  • 5600 MT/s speed with CL46 latency boosts responsiveness
  • 1 V operation reduces power draw
  • 288-pin unbuffered design fits ASUS ROG-STRIX-B650-A Gaming WiFi
  • Major OEM chips ensure reliable compatibility

16GB DDR5 5600 ECC UDIMM for ASUS ROG-STRIX-B650-A

This 16GB DDR5 5600 ECC UDIMM module is built for the ASUS ROG-STRIX-B650-A Gaming WiFi motherboard. It runs at PC5-44800 with a CL46 latency and a 1.10V operating voltage. The single-rank 1Rx8 design uses major OEM chips from Samsung, Micron or Hynix. The 288-pin unbuffered form factor fits directly into the board's DDR5 slots.

Suits ECC builds; not for non-ECC

This module suits builders who need error-correcting memory on a consumer-platform board that explicitly supports unbuffered ECC. It will not work in systems that require registered or load-reduced DIMMs. Buyers whose motherboards lack ECC support in the BIOS should look elsewhere. The lack of a heat spreader also makes it unsuitable for heavily overclocked configurations.

Single-rank 1Rx8 CL46 at 1.10V determines

The decisive specification is the single-rank 1Rx8 organisation combined with CL46 timing at 1.10V. This exact electrical and logical profile must match the motherboard's qualified vendor list for stable operation. A different rank structure, latency or voltage will prevent the system from posting or cause silent data errors. Always verify the QVL before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $390.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $24.44 per GB
Pricier than about 69% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineASUS Gaming Motherboard Compatible Series Memory
Model nameASUS DDR5 5600 MHz ECC Unbuffered UDIMM
Part numberME44800-618K1
Total capacity16 GB
Product type288-Pin DDR5 ECC UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsASUS
In the box
Included items16 GB (1 × 16 GB) DDR5 5600 MHz PC5-44800 1Rx8 1.1 V CL46 288-PIN ECC Unbuffered UDIMM

Questions about this item

How can I confirm the module is running at 5600 speed and CL46 latency after installation?

Enter the motherboard BIOS or UEFI and check that the reported memory frequency reads 5600 and the CAS latency reads 46; the SPD data on the module itself is programmed to those values.

What does the package contain and is anything else required for installation?

The box includes one 16GB 288-pin DDR5 ECC unbuffered UDIMM rated at 5600 PC5-44800 1.10V CL46 1Rx8; no additional parts or cables are needed — just an available DDR5 DIMM slot on the board.

Which capacity and speed version should I choose for this motherboard?

This specific module is a single 16GB stick at 5600 MT/s with CL46 timings and ECC support; select it when you want 16GB of ECC DDR5 that matches the board’s native 5600 specification.

More in Model-Specific Memory Upgrades

Similar items