We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V 288-Pin UDIMM memory upgrade

SKU CH-5JQX-13VSJ

A 16 GB DDR5 desktop memory module running at 5600 MHz with CL46 latency, 1.1 V operation and 288-pin UDIMM form factor, validated for the Supermicro X14SAZ-TLN4F motherboard

  • Total capacity16 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 16GB

  • Exact DDR5-5600 spec match ensures full-speed recognition
  • 16 GB capacity adds responsive multitasking headroom
  • Major OEM chips tested for stable rated operation
  • 288-pin UDIMM form factor fits Supermicro X14SAZ-TLN4F
  • Low 1.10 V draw keeps system power efficient

Exact-match DDR5-5600 upgrade for Supermicro boards

This 16 GB DDR5 module runs at 5600 MHz with CL46 latency and 1.10 V. It uses a 1Rx8 unbuffered UDIMM layout so the memory controller recognises the full capacity at rated speed without manual tuning.

DDR5-5600 JEDEC limits apply

The module operates at the standard 5600 MT/s data rate and 1.10 V defined by the DDR5 specification. No higher frequency or lower latency is supported without exceeding the validated JEDEC profile for this density and rank configuration.

Major-OEM chips, no heat spreader.

Built with Samsung, Micron or Hynix ICs and tested for stability at rated settings. The bare-module design fits tight DIMM slots and standard UDIMM retention clips, while the single-stick kit leaves remaining slots free for future expansion.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $198.99
Cheaper than about 59% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $12.44 per GB
Pricier than about 58% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-618K1
Total capacity16 GB
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I choose the 16GB 1Rx8 DDR5 5600MHz CL46 module or a different capacity for my Supermicro X14SAZ-TLN4F motherboard?

This exact-match 16GB DDR5-5600 (PC5-44800) 1Rx8 Non-ECC UDIMM is verified for the Supermicro X14SAZ-TLN4F motherboard and meets the board's memory-population rules; consult your manual for supported capacities and approved DIMM population order before purchase.

What does the DDR5 5600MHz PC5-44800 rating mean for real-world performance in my desktop?

The module runs at 5600 MT/s with CL46 latency at 1.10V, delivering the rated speed and timing your memory controller expects for stable operation and a cost-effective performance boost.

Is the 288-pin DDR5 UDIMM interface compatible with my motherboard and what does it limit?

The 288-pin Unbuffered DDR5 UDIMM form factor is required by the Supermicro X14SAZ-TLN4F; it is not an ECC server module or SODIMM, so it fits only desktop boards that accept non-ECC UDIMM DDR5.

More in Model-Specific Memory Upgrades

Similar items