We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V ECC UDIMM memory upgrade

SKU CH-CB59-QRDYP

16 GB DDR5 ECC UDIMM at 5600 MHz, CL46, 1.1 V, 288-pin, verified for Supermicro X13SAW-F

  • Total capacity16 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 16GB

  • Error-correcting code protects data integrity on the fly
  • 5600 MT/s DDR5 speed matches the board's rated specification
  • 1 V operation keeps power draw low
  • 288-pin unbuffered UDIMM fits the required slot type
  • 1Rx8 single-rank layout meets the controller's timing expectations

Exact-Match 16 GB DDR5-5600 ECC UDIMM

This 16 GB DDR5 module runs at 5600 MHz with CL46 latency and 1.1 V. It uses a 1Rx8 unbuffered ECC design on a 288-pin UDIMM form factor. The part is built for the Supermicro X13SAW-F motherboard where the memory controller expects this precise rank, voltage and timing.

Suited for ECC-critical Supermicro X13SAW-F builds

The module fits administrators who need error-correcting memory on that specific board and cannot use registered or SO-DIMM alternatives. It is not for systems that require RDIMMs, non-ECC memory, higher capacities per slot or a different DDR generation.

DDR5 5600 CL46 1.1 V 1Rx8 ECC UDIMM

The single specification that decides fit is the exact DDR5-5600 CL46 1.1 V 1Rx8 unbuffered ECC UDIMM profile. Your motherboard manual must confirm this speed, rank, voltage and ECC type before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $418.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $26.19 per GB
Pricier than about 72% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 ECC Unbuffered UDIMM Memory
Part numberME44800-618K1
Total capacity16 GB
Product type288-Pin DDR5 ECC UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What does the 5600 MHz speed mean when the module is installed in a Supermicro X13SAW-F motherboard?

The module runs at DDR5 5600 with CL46 timing and 1.1 V, delivering the rated data rate the board's memory controller expects for full capacity recognition.

What does the PC5-44800 designation tell me about the DDR5 interface on this UDIMM?

PC5-44800 is the JEDEC standard name for DDR5 5600, confirming the module meets the official speed, voltage and timing specification for unbuffered ECC UDIMMs.

What physical slot and clearance does this 288-pin UDIMM need to fit the X13SAW-F?

It requires a standard 288-pin DDR5 UDIMM slot; the module has no heat spreader, so it fits in tight layouts where taller DIMMs would interfere with coolers or chassis walls.

More in Model-Specific Memory Upgrades

Similar items