We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board DDR5 memory module with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 ECC UDIMM Supermicro X14SAZ-F memory upgrade

SKU CH-BCG2-MWJP0

16 GB DDR5-5600 ECC UDIMM with CL46 timing and 1.1 V operation, validated for Supermicro X14SAZ-F motherboards

  • Total capacity16 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 16GB

  • 16 GB DDR5-5600 ECC UDIMM adds reliable capacity to your Supermicro X14SAZ-F
  • CL46 1.1 V timing matches the board's memory controller for full-speed operation
  • 1Rx8 unbuffered ECC corrects single-bit errors on the fly to prevent silent data corruption
  • 288-pin UDIMM form factor fits the exact slot type required by the motherboard
  • Built with major OEM DRAM chips from Samsung, Micron or Hynix for consistent quality

Targeted DDR5 ECC upgrade

This 16 GB DDR5-5600 module is built specifically for the Supermicro X14SAZ-F motherboard. It delivers the exact 288-pin unbuffered ECC UDIMM form factor that the board requires.

Sustained error-correction stability

ECC circuitry detects and corrects single-bit errors continuously, preventing silent data corruption during long compute runs. The 1.1 V operating voltage and CL46 timing remain consistent under load without thermal throttling.

No-spreader UDIMM practicality

The bare 1Rx8 PCB fits tight DIMM slots without clearance issues. Single-rank organisation simplifies population rules, and the 288-pin keying prevents accidental insertion into incompatible sockets.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $373.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $23.37 per GB
Pricier than about 68% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 ECC Unbuffered UDIMM Memory
Part numberME44800-618K1
Total capacity16 GB
Product type288-Pin DDR5 ECC UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much heat and power does the 1.1V DDR5 ECC UDIMM draw when the Supermicro X14SAZ-F runs continuously?

The module operates at 1.1V with no heat spreader, so it relies on case airflow; DDR5 moves voltage regulation onto the DIMM, keeping system power draw predictable during all-day workloads.

What must the motherboard provide for this 288-pin 1Rx8 unbuffered ECC DIMM to function?

The Supermicro X14SAZ-F must support DDR5 5600 PC5-44800 unbuffered ECC UDIMMs in a 288-pin slot and follow its documented population order for 1Rx8 modules.

Will this CL46 5600MHz stick run at rated speed beside slower DDR5 modules already installed?

The board will clock all populated slots to the lowest common speed and latency; mixing slower DDR5 with this 5600MHz CL46 kit forces the faster module to downclock.

More in Model-Specific Memory Upgrades

Similar items