We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black chips and gold edge contacts

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz ECC Registered RDIMM CL46 1.1V Supermicro H13SSF memory upgrade

SKU CH-413A-H5V2Z

16 GB DDR5 5600 MHz ECC registered RDIMM validated for the Supermicro H13SSF motherboard

  • Total capacity16 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • Exact-match DDR5-5600 ECC RDIMM runs at rated speed on Supermicro H13SSF
  • Registered 1Rx8 architecture keeps every slot stable at full population
  • On-die ECC corrects single-bit errors preventing silent data corruption
  • 1 V CL46 timing matches the board's memory controller expectations
  • Major-brand Samsung Micron Hynix chips deliver enterprise-grade reliability

Exact-Match DDR5 Upgrade for Supermicro H13SSF

This 16 GB DDR5 5600 RDIMM is built to the precise rank, voltage and timing the Supermicro H13SSF memory controller expects. Registered ECC architecture offloads the controller so every populated slot runs at full rated speed. It installs as a single 288-pin module for immediate capacity expansion.

DDR5 5600 Interface Constraints

The module operates at 5600 MT/s with CL46 latency at 1.1 V, the exact electrical profile the platform validates. Registered buffering is mandatory; unbuffered or SODIMM alternatives will not function in this board. Population order and maximum capacity per channel are governed by the motherboard manual and must be followed.

Replaces Slower or Non-ECC DDR5 Modules

Upgrading from lower-speed DDR5 or non-ECC memory eliminates silent data corruption risk and unlocks the full 5600 MT/s throughput the CPU supports. The jump is worth it when workloads demand sustained bandwidth and error correction across all slots. Builders needing UDIMM form factors or higher densities per module should look elsewhere.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $457.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $28.62 per GB
Pricier than about 81% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K1
Total capacity16 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Should I pick the 16 GB module or a different capacity for my Supermicro H13SSF?

This kit is a single 16 GB DDR5 5600 MHz Registered ECC RDIMM. Add one module per available slot following the motherboard's population guide to reach the total memory you need.

What does the 5600 MHz rating deliver once installed in the server?

The module runs at DDR5 5600 (PC5-44800) with CL46 latency at 1.1 V, giving the memory controller its expected speed and timing for full-capacity operation.

Does the 288-pin RDIMM interface limit how many modules I can populate?

The 288-pin Registered RDIMM format is the only type the H13SSF accepts; the board's own slot count and population rules set the practical limit.

More in Model-Specific Memory Upgrades

Similar items