We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 16GB DDR5 6400 CL52 1.1V 1Rx8 ECC Registered RDIMM memory upgrade

SKU CH-MYXY-CP0EW

16 GB DDR5 6400 CL52 1.1 V ECC registered RDIMM validated for the Supermicro H13SSL-N motherboard

  • Total capacity16 GB
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • Exact DDR5-6400 CL52 1.1V spec matches server controller for full-speed operation
  • Registered ECC RDIMM offloads controller and corrects single-bit errors for uptime
  • 16GB 1Rx8 288-pin module validated for Supermicro H13SSL-N motherboard fit
  • Major-brand Samsung, Micron or Hynix DRAM chips ensure enterprise-grade reliability
  • Lifetime replacement warranty with US-based technical support included

Exact-match DDR5 server upgrade

This 16 GB DDR5-6400 module is built for the Supermicro H13SSL-N motherboard. It delivers the precise rank, voltage, and timing the board's memory controller expects for full-capacity recognition.

Registered ECC limits and population rules

Registered architecture offloads the controller so every slot can run fully populated at rated speed. ECC corrects single-bit errors on the fly to stop silent data corruption. The motherboard manual defines supported capacities and required DIMM population order.

288-pin RDIMM form factor without spreader

The 288-pin Registered DIMM fits only boards wired for DDR5 RDIMMs, not UDIMM or SODIMM slots. No heat spreader is fitted, so airflow in the chassis must handle thermal dissipation. Buyers needing unbuffered memory or desktop form factors cannot use this module.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $472.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $29.56 per GB
Pricier than about 84% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-618K1
Total capacity16 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB DDR5 6400 MHz PC5-51200 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Should I pick the 16 GB DDR5-6400 CL52 1Rx8 ECC RDIMM or a different capacity?

This module is a single 16 GB stick rated at DDR5-6400 with CL52 latency, 1.1 V operation and 1Rx8 registered ECC. Choose it when your Supermicro H13SSL-N requires exactly that rank, voltage and timing; add more identical sticks only if the board's population rules allow additional DIMMs per channel.

What does the 6400 MT/s rating actually deliver in the Supermicro H13SSL-N?

The board's memory controller will run this RDIMM at its rated 6400 MT/s (PC5-51200) with CL52 timings at 1.1 V, provided the BIOS is current and the DIMM is installed in a supported slot. Registered buffering lets every populated slot operate at that speed without down-clocking.

How does the 288-pin RDIMM interface limit performance on this platform?

The 288-pin registered DDR5 interface matches the H13SSL-N's DIMM slots exactly; the registered buffer removes electrical load from the memory controller so full population at 6400 MT/s is possible, while ECC corrects single-bit errors without reducing throughput.

More in Model-Specific Memory Upgrades

Similar items