We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR5 6400MHz CL52 1Rx8 1.1V ECC RDIMM memory upgrade for GIGABYTE MS34-CP0

SKU CH-5A2W-G1BWJ

16 GB DDR5 6400 MHz CL52 1Rx8 1.1 V ECC registered RDIMM validated for GIGABYTE MS34-CP0 servers

  • Total capacity16 GB
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 16GB

Show 18 more
  • Exact-match 16 GB DDR5-6400 RDIMM installs at full rated speed
  • Registered ECC design corrects single-bit errors for server uptime
  • 1 V CL52 1Rx8 timing matches controller expectations precisely
  • 288-pin form factor fits GIGABYTE MS34-CP0 memory slots directly
  • Major OEM chips from Samsung, Micron or Hynix ensure enterprise stability

Exact-match DDR5 RDIMM for GIGABYTE MS34-CP0

This 16 GB DDR5-6400 module is built as a direct upgrade for the GIGABYTE MS34-CP0 motherboard. It uses a 288-pin Registered DIMM form factor with ECC and a 1Rx8 layout, matching the board's memory controller requirements for full-speed recognition at 1.1 V and CL52 latency.

Suited for servers needing registered ECC stability

It fits administrators expanding a compatible GIGABYTE platform that requires registered DDR5 RDIMMs with on-die error correction. Builders using consumer boards, laptops, or systems that only accept unbuffered UDIMMs or SODIMMs cannot use this module.

16 GB single-module capacity

The 1Rx8 organization lets the memory controller drive a fully populated chassis at the rated 6400 MT/s without signal degradation. Workloads exceeding 16 GB per slot or requiring higher-density ranks will need additional modules or a different density.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $456.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $28.56 per GB
Pricier than about 80% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-618K1
Total capacity16 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items16 GB DDR5 6400 MHz PC5-51200 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What motherboard must I already have for this 16GB DDR5 6400MHz CL52 1.1V ECC RDIMM to work?

This module is validated for the GIGABYTE MS34-CP0 motherboard that requires a 288-pin Registered DDR5 DIMM running at 6400 MT/s with 1.10V and CL52 timing.

How will this Registered ECC RDIMM behave if I keep other DDR5 RDIMMs already installed in the MS34-CP0?

The registered architecture buffers address and command signals so the memory controller sees one load per slot, allowing mixed-capacity populations while ECC continues to correct single-bit errors across all modules.

How can I verify the 16GB DDR5 6400MHz CL52 kit is running at its rated speed and ECC is active after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 6400 MT/s, voltage shows 1.10V, timings show CL52, and ECC status reports enabled for the installed 16GB module.

More in Model-Specific Memory Upgrades

Similar items