We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two bare green DDR5 RDIMM modules side by side

NEMIX RAM

NEMIX RAM 192GB (2 x 96GB) DDR5 4800 CL40 ECC Registered RDIMM memory upgrade for GIGABYTE MZ33-CP1

SKU CH-9H37-WF9SW

192 GB DDR5-4800 ECC registered RDIMM kit (2 × 96 GB, CL40, 1.1 V) validated for the GIGABYTE MZ33-CP1 server board

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 2X96GB

Show 18 more
  • 192GB total capacity for high-density server workloads using two 96GB modules
  • DDR5 4800 speed with CL40 latency for rated performance on the GIGABYTE MZ33-CP1
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 2Rx4 organisation at 1.1V matches the board's population rules exactly
  • 288-pin RDIMM form factor fits the required server memory slots

Exact-fit DDR5 upgrade

This 192GB kit (2 x 96GB) of DDR5 4800 Registered ECC RDIMM memory is validated for the GIGABYTE MZ33-CP1 motherboard. It delivers the precise 2Rx4 rank structure, 1.1V operating voltage and CL40 timing the board's memory controller expects for full-speed recognition.

Replaces slower or smaller kits

Swapping out lower-capacity DDR5 RDIMMs or mixed-rank configurations eliminates population-rule conflicts and lets every slot run at the rated 4800 MT/s. The jump is worth it when your workload needs the full 192GB address space without downclocking or stability compromises.

192GB headroom for dense workloads

Two 96GB modules provide 192GB of ECC-protected capacity, handling large in-memory databases, virtualization clusters and HPC datasets. Registered buffering keeps the signal clean at full population, while ECC corrects single-bit errors on the fly. Workloads that exceed 192GB or require speeds beyond 4800 MT/s will need a different platform.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,079.99
Pricier than about 80% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $26.46 per GB
Pricier than about 73% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items192 GB 2 × 96 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will these 288-pin DDR5 RDIMMs fit the GIGABYTE MZ33-CP1 motherboard slots?

Yes, the kit is built to the 288-pin DDR5 RDIMM form factor that the GIGABYTE MZ33-CP1 requires; it is not a UDIMM or SODIMM.

What is the correct installation order for the two 96 GB modules on this board?

Consult the GIGABYTE MZ33-CP1 manual for the approved DIMM population sequence; the kit must be installed in the slots the board specifies for a two-module configuration.

When should the 2Rx4 registered ECC modules be replaced in a production server?

Replace them if ECC logs show rising correctable-error counts, if the system fails memory diagnostics, or when a capacity upgrade is required beyond the 192 GB this kit provides.

More in Model-Specific Memory Upgrades

Similar items