We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM sticks, black chips, no heat spreader, 288 pins

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 5600 ECC RDIMM X14SDI-36C-SP3F memory upgrade

SKU CH-CY30-4N2EH

192GB DDR5 5600 ECC registered server memory kit with two 96GB modules, CL46 latency, 1.1V operation, and 288-pin RDIMM form factor, validated for the Supermicro X14SDI-36C-SP3F motherboard

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 2X96GB

  • 192 GB total capacity in a matched 2 x 96 GB kit
  • DDR5 5600 MT/s speed rated at PC5-44800 for full bus throughput
  • Registered ECC RDIMM design corrects single-bit errors and offloads the memory controller
  • CL46 latency at 1.1 V delivers spec-compliant timing and power draw
  • Verified fitment for Supermicro X14SDI-36C-SP3F motherboard with 288-pin RDIMM slots

Exact-fit server memory kit

This 192GB kit delivers two 96GB DDR5 5600 RDIMM modules built to the Supermicro X14SDI-36C-SP3F motherboard's exact specifications. Registered ECC operation with CL46 timing at 1.1V ensures the memory controller recognises full capacity and runs at rated speed without manual tuning. The 2Rx4 organisation matches the board's population rules for stable, fully populated operation.

Replaces mismatched or undersized DIMMs

Upgrading from smaller-capacity or mixed-rank modules removes the risk of downclocking, reduced channel count or boot failures caused by population conflicts. The jump is worth it when your workloads need the full 192GB at the native 5600 MT/s data rate and ECC protection across every slot. Builders using UDIMM or SODIMM form factors cannot use this registered kit.

Limited to DDR5 288-pin RDIMM slots

The DDR5 interface provides 5600 MT/s bandwidth only on motherboards wired for registered DIMMs with matching voltage and timing support. Unbuffered or consumer boards will not accept the 288-pin registered form factor. Maximum capacity per slot and total system memory remain bound by the platform's memory-controller design and qualified-vendor list.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $6,065.99
Pricier than about 82% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $31.59 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 2 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the 288-pin DDR5 RDIMM form factor match the Supermicro X14SDI-36C-SP3F motherboard slots?

Yes, the kit uses 288-pin DDR5 RDIMM modules which are the exact form factor required by the Supermicro X14SDI-36C-SP3F motherboard.

What population order should I follow when installing the two 96GB modules on this motherboard?

Consult the Supermicro X14SDI-36C-SP3F manual for the approved DIMM population order; installing in the wrong slots can prevent the system from recognising the full 192GB capacity.

Will the registered ECC design reduce the need for memory-related maintenance over time?

The registered architecture offloads the memory controller and ECC corrects single-bit errors on the fly, reducing silent data corruption and unplanned reboots during long-term operation.

More in Model-Specific Memory Upgrades

Similar items