We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 6400 CL52 ECC RDIMM memory upgrade for GIGABYTE MS34-CP0

SKU CH-56PP-29M8Q

A 192GB DDR5 server memory kit of two 96GB ECC registered DIMMs running at 6400MHz CL52 for the GIGABYTE MS34-CP0 motherboard

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 2X96GB

Show 18 more
  • 192 GB total capacity with two 96 GB modules for high-density server workloads
  • DDR5 6400 speed rated at PC5-51200 for fast data throughput
  • CL52 CAS latency at 1.1 V for stable registered operation
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 288-pin RDIMM form factor verified for GIGABYTE MS34-CP0 motherboard

Exact-match DDR5-6400 RDIMM kit for GIGABYTE

This 192 GB kit contains two 96 GB DDR5-6400 registered ECC modules built to the exact rank, voltage and timing the MS34-CP0 memory controller expects. It targets server administrators who need the full capacity recognised at rated speed without manual tuning.

Fits 288-pin RDIMM slots

The modules use the 288-pin registered RDIMM form factor required by the board, not UDIMM or SODIMM. Registered architecture lets every populated slot run at full capacity while ECC corrects single-bit errors on the fly, reducing silent data corruption and unplanned reboots in production workloads.

Two-module kit simplifies population order

The matched pair arrives as a single kit so the correct 2Rx4 rank configuration is installed together, avoiding population-order mistakes. Buyers who need different capacities or mixed-rank layouts must consult the motherboard manual for approved DIMM sequences before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,431.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $28.29 per GB
Pricier than about 79% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items192 GB 2 × 96 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the 6400 MT/s CL52 timing hold steady when all slots are filled on the MS34-CP0?

The kit is spec-matched to the board's memory-population rules and runs at DDR5 6400 with CL52 when populated as directed by the motherboard manual.

What is the typical power draw and thermal behaviour of these 2Rx4 RDIMMs at 1.1 V during continuous server workloads?

Each module operates at 1.10 V without a heat spreader; registered buffering reduces controller load so power and thermals stay within standard DDR5 RDIMM limits for 24/7 operation.

Must the GIGABYTE MS34-CP0 already support 288-pin DDR5 RDIMMs and registered ECC for this kit to function?

Yes, the motherboard must accept 288-pin DDR5 RDIMMs with registered ECC; the kit will not work in UDIMM or SODIMM slots.

More in Model-Specific Memory Upgrades

Similar items