We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 192GB (4x48GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM for ASRock IMB-A1302/1700

SKU CH-ZH66-RADJV

A 192 GB DDR5 kit of four 48 GB UDIMMs at 5600 MT/s CL46, 1.1 V, validated for ASRock IMB-A1302 and IMB-A1700 boards

  • Total capacity192 GB (4 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 192 GB capacity with four 48 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • CL46 latency at 1.1 V operating voltage
  • 2Rx8 dual-rank unbuffered UDIMM design
  • Validated for ASRock IMB-A1302 and IMB-A1700

DDR5 5600 kit for ASRock IMB-A1302 and IMB-A1700

This 192 GB kit contains four 48 GB DDR5 5600 UDIMM modules built for ASRock Industrial Micro-ATX motherboards IMB-A1302 and IMB-A1700. The memory runs at CL46 latency and 1.1 V without ECC or heat spreaders. It targets workstations and servers that need maximum capacity on these specific boards.

Installation notes for 288-pin DDR5 UDIMM

The modules use the standard 288-pin DDR5 UDIMM form factor and install in minutes by seating each stick until the retention clips click. Common issues include mixing kits with different speeds or ranks, failing to populate all four slots for full 192 GB capacity, and not confirming the motherboard BIOS recognises the full density per DIMM.

Pre-order checks for ASRock Industrial platforms

Verify your motherboard is exactly the IMB-A1302 or IMB-A1700 model before ordering. Confirm the board supports 48 GB non-ECC unbuffered UDIMMs at DDR5 5600 and that four slots are available. Check the current BIOS version against ASRock Industrial documentation for 192 GB total capacity support.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,442.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (4 × 48 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $12.72 per GB
Pricier than about 59% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-4828K4
Total capacity192 GB (4 × 48 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsASRock Industrial
In the box
Included items192 GB (4 × 48 GB) DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Questions about this item

How do I verify the 192GB DDR5 5600 kit is running at CL46 1.1V after installation?

Enter the BIOS on the ASRock IMB-A1302 or IMB-A1700 and confirm the memory speed shows 5600 MT/s, CAS latency reads 46, and voltage is set to 1.10V; the POST screen should also report 192 GB total across the four slots.

What exactly ships in the MD44800-4828K4 package and do I need any extra brackets or cables?

The box contains four 48 GB 288-pin DDR5 UDIMM modules — nothing else is included and no additional brackets, cables or adapters are required for the compatible ASRock Industrial motherboards.

Should I choose the 4 x 48 GB 2Rx8 kit or a different capacity for my IMB-A1302?

Select this 192 GB kit when the board has four UDIMM slots and you need the maximum supported density; each module is a 48 GB 2Rx8 device running at DDR5 5600 CL46 1.1V.

More in Model-Specific Memory Upgrades

Similar items