Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Four-module kit provides 192 GB of DDR5 6400 ECC registered memory at CL52 and 1.1 V for the Supermicro H14DSH motherboard
This 192 GB kit contains four 48 GB DDR5 RDIMMs rated at 6400 MT/s with CL52 latency and 1.1 V operation. It targets administrators upgrading a Supermicro H14DSH server that requires registered ECC modules in a 288-pin form factor. The 2Rx8 organization matches the board's memory-controller expectations for full-capacity recognition.
Registered architecture allows every slot to be populated at the rated speed, but the motherboard's own population rules still dictate which slots must be filled first and the maximum capacity per channel. The 1.1 V JEDEC voltage is fixed; the modules do not support XMP or manual over-voltage profiles. ECC corrects single-bit errors on the fly, yet it cannot compensate for an unsupported DIMM configuration.
The 288-pin RDIMMs key only one way into the server's DIMM sockets, so physical insertion is simple. The usual failure mode is ignoring the manual's slot-order chart, which leaves the system at reduced capacity or prevents boot entirely. Firmware should be updated before installation, and the full 192 GB must be validated in the BIOS memory map after power-on.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Server Memory |
| Model name | DDR5 ECC RDIMM Registered Server Memory |
| Part number | MR51200-4828K4 |
| Total capacity | 192 GB (4 × 48 GB) |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 6400 (PC5 51200) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL52 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 192 GB 4 × 48 GB DDR5 6400 MHz PC5-51200 2Rx8 1.1 V 288-PIN ECC RDIMM KIT |
The 192GB kit provides four 48GB modules that match the H14DSH population rules exactly, letting the memory controller recognise full capacity at the rated DDR5 6400 speed.
The kit runs at 6400 MT/s with CL52 latency and 1.10V, delivering the bandwidth and timing the H14DSH memory controller expects for stable full-speed operation.
The registered architecture buffers address and command signals so all four slots can be populated at 192GB total, while ECC corrects single-bit errors on the fly to prevent silent data corruption.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?