We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR4 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 192GB (6x32GB) DDR4 3200 CL22 2Rx4 1.2V ECC RDIMM memory upgrade

SKU CH-JDDV-ZSKMN

A 192 GB DDR4 ECC registered kit of six 32 GB modules running at 3200 MT/s with CL22 latency and 1.2 V operation

  • Total capacity192 GB (6 × 32 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • 192 GB total capacity for memory-intensive server workloads
  • DDR4 3200 speed with PC4-25600 bandwidth for fast data throughput
  • ECC registered design detects and corrects errors to protect data integrity
  • 2Rx4 dual-rank organisation across six 32 GB modules for high density
  • 2 V operation reduces power draw in compatible ThinkMate Supermicro systems

192GB DDR4 ECC RDIMM Kit

This NEMIX RAM kit delivers 192GB across six 32GB registered DIMMs built for ThinkMate Supermicro SuperServer 740P-TR and 740P-TRT tower systems. ECC and registered operation provide the error correction and signal integrity required for mission-critical server workloads. Modules run at DDR4 3200 with CL22 latency at 1.2V. The 288-pin RDIMM form factor fits the validated platforms directly.

Upgrade From Lower Capacity Or Non-ECC

The jump is worth it when your current configuration lacks the 192GB total capacity or runs unbuffered non-ECC memory that cannot meet data-integrity demands. Registered 2Rx4 organisation allows the memory controller to address higher densities per channel than unbuffered alternatives. Systems already populated to the maximum supported slot count cannot accept this kit without removing existing modules.

DDR4 3200 Registered Interface Limits

DDR4 3200 sets the maximum transfer rate at PC4-25600 and the registered buffer adds one clock cycle of command latency versus unbuffered modules. The 1.2V operating voltage is fixed for the DDR4 standard and cannot be lowered for power saving. ECC overhead consumes a portion of the raw bandwidth for error detection and correction. Mixing registered and unbuffered DIMMs in the same system is not supported.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,810.99
Pricier than about 67% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (6 × 32 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $9.43 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTHINKMATE Server/Workstation Compatible Series Memory
Model nameSuperMicro DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-324K6
Total capacity192 GB (6 × 32 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx4
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTHINKMATE
In the box
Included items192 GB (6 × 32 GB) DDR4 3200 MHz PC4-25600 2Rx4 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the 288-pin DDR4 RDIMM form factor fit the Supermicro SuperServer 740P-TR and 740P-TRT tower memory slots?

Yes, the kit uses standard 288-pin DDR4 RDIMM modules designed for the ThinkMate Supermicro SuperServer 740P-TR and 740P-TRT tower platforms.

What is the correct sequence for populating the six 32 GB modules across the server memory channels?

Follow the Supermicro motherboard manual to populate all six slots in the prescribed channel order; the 2Rx4 registered DIMMs must be installed in matched sets per channel for proper operation.

When should the registered ECC RDIMMs be replaced if correctable error counts start rising in the system logs?

Replace modules when the platform management firmware reports increasing correctable ECC errors or when memory diagnostics flag a specific DIMM as degraded.

More in Model-Specific Memory Upgrades

Similar items