We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR4 RDIMM sticks, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 192GB (6x32GB) DDR4 3200 CL22 ECC RDIMM for Thinkmate STX-NL-QE24 E3 memory upgrade

SKU CH-SF8V-8MX1V

192GB DDR4 3200 ECC registered server memory kit with six 32GB modules for Thinkmate STX-NL-QE24 E3 storage servers

  • Total capacity192 GB (6 × 32 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • 192 GB total capacity with six 32 GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC registered RDIMM for data integrity and signal stability
  • CL22 latency at 1.20 V operating voltage
  • 288-pin 2Rx8 form factor built for Thinkmate STX-NL-QE24 E3

Capacity and Purpose

This kit provides 192GB of DDR4 ECC registered memory across six 32GB modules. It is built for the Thinkmate STX-NL-QE24 E3 nearline storage server and suits workloads that demand large, error-corrected capacity. Buyers needing non-ECC consumer DIMMs or smaller upgrade increments cannot use this configuration.

Thermals and Power

Each module runs at 1.2V with a CL22 latency at 3200MHz. The registered design reduces electrical load on the server memory controller during sustained operation. No heat spreaders are fitted, so airflow across the 288-pin DIMMs must be maintained by the chassis cooling system.

Build and Connectors

Modules use major OEM chips from Samsung, Micron or Hynix in a 2Rx8 organisation. The 288-pin RDIMM form factor locks into the server's registered DIMM slots for secure seating. Systems that require unbuffered UDIMMs or lack registered memory support are not compatible with this kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,712.99
Pricier than about 66% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (6 × 32 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $8.92 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTHINKMATE Server/Workstation Compatible Series Memory
Model nameTHINKMATE DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-328K6
Total capacity192 GB (6 × 32 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTHINKMATE
In the box
Included items192 GB (6 × 32 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How do I install the six 32 GB DDR4 RDIMMs into the Thinkmate STX-NL-QE24 E3 server, and which step is most often missed?

Power down, open the chassis, align each 288-pin module with the keyed slot, press firmly until both retention clips click, then populate all six channels in the order shown in the system manual; the step most often missed is verifying the correct channel sequence for 2Rx8 registered DIMMs.

What maintenance or replacement will this 192 GB DDR4 3200 ECC RDIMM kit need over its service life?

No routine maintenance is required; ECC corrects single-bit errors on the fly, and the modules carry a lifetime replacement warranty, so a failed stick is simply swapped for a new one without scheduled service.

What is the first limit that appears when the memory runs at 3200 MT/s under sustained server workloads?

The CL22 CAS latency at 1.20 V sets the timing ceiling; under continuous load the registered buffer and ECC overhead become the primary latency bottleneck before thermal or bandwidth limits are reached.

More in Model-Specific Memory Upgrades

Similar items