We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 192GB (6x32GB) DDR4 3200MHz CL22 ECC RDIMM 1.2V 2Rx8 288-Pin Server Memory Upgrade

SKU CH-VM9H-NDCHF

192 GB DDR4 ECC registered server memory kit with six 32 GB modules at 3200 MHz CL22 for Thinkmate rackmount systems

  • Total capacity192 GB (6 × 32 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • 192 GB total capacity across six 32 GB modules
  • DDR4 3200 MHz speed with CL22 latency for server workloads
  • ECC registered RDIMM design protects data integrity
  • 2 V operation reduces power draw in dense configurations
  • Validated for Thinkmate RAX-XS4 and RAX-XH2 rackmount servers

Capacity and compatibility

This NEMIX RAM kit provides 192GB of DDR4 memory across six 32GB RDIMM modules. It is built for THINKMATE RAX-XS4-21S1-10G, RAX-XS4-11S1-10G and RAX-XH2-11S3 rackmount servers that require registered ECC memory. The 2Rx8 organisation and 288-pin form factor match the platform's registered DIMM slots. Builders needing unbuffered UDIMMs or non-ECC memory for desktop platforms cannot use this kit.

Sustained-load behaviour

Modules run at DDR4 3200 (PC4-25600) with a CAS latency of CL22 and operate at 1.20V. Registered buffering and on-die ECC correct single-bit errors during continuous operation, maintaining data integrity for virtualisation, database and compute workloads. Major OEM Samsung, Micron or Hynix chips are stress-tested under load before shipment. Systems limited to lower memory speeds or fewer populated channels will not reach the rated throughput.

Thermals noise and power

The modules have no heat spreaders, relying on server chassis airflow for cooling. At 1.20V the kit draws minimal power per DIMM, keeping thermal contribution low in densely populated racks. No moving parts mean zero acoustic noise from the memory itself. Installations in enclosures with restricted airflow should verify that case fans provide sufficient velocity across the bare PCBs.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,779.99
Pricier than about 67% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (6 × 32 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $9.27 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTHINKMATE Server/Workstation Compatible Series Memory
Model nameTHINKMATE DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-328K6
Total capacity192 GB (6 × 32 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTHINKMATE
In the box
Included items192 GB (6 × 32 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How much power does each 32GB DDR4 3200 module draw at 1.2V when the server runs continuously?

Each module operates at 1.2V standard DDR4 voltage. Registered ECC RDIMMs typically draw a few watts per stick under load; total kit consumption scales with all six modules populated.

What must the ThinkMate rackmount already have to accept this 6×32GB RDIMM kit?

The server needs DDR4 RDIMM slots that support 3200MHz registered ECC memory and a memory controller able to address 192GB across six 2Rx8 modules.

Will this CL22 3200MHz kit run stably alongside slower DDR4 DIMMs already installed in the ThinkMate?

The memory controller will down-clock all populated slots to the lowest common speed and highest latency, so older DDR4 RDIMMs will work but at reduced performance.

More in Model-Specific Memory Upgrades

Similar items