We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 192GB (6x32GB) DDR5 6400 CL52 2Rx8 ECC RDIMM Supermicro H13SVW-N memory upgrade

SKU CH-ETME-QEVME

A 192 GB DDR5-6400 ECC RDIMM kit in six 32 GB modules, registered and spec-matched for the Supermicro H13SVW-N motherboard

  • Total capacity192 GB (6 × 32 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 192 GB capacity from six 32 GB modules for dense server workloads
  • DDR5 6400 speed with CL52 latency delivers rated throughput
  • 1 V registered ECC RDIMM design reduces controller load and corrects errors
  • 2Rx8 288-pin form factor matches Supermicro H13SVW-N slot requirements
  • Lifetime replacement warranty with US-based technical support included

192GB DDR5 ECC RDIMM Kit for Supermicro H13SVW-N

This 192GB kit contains six 32GB DDR5 Registered DIMMs built for the Supermicro H13SVW-N motherboard. Each module runs at 6400MHz with CL52 latency at 1.1V. The 2Rx8 registered ECC design matches the board's memory controller requirements for full-capacity recognition and stable operation in every slot.

Who this suits and who should look elsewhere

Server administrators upgrading a Supermicro H13SVW-N with the exact DDR5 RDIMM specification the platform expects. The registered ECC architecture supports fully populated configurations while correcting single-bit errors. Builders needing UDIMM, SODIMM or non-ECC modules for workstations or consumer boards cannot use this kit.

DDR5 6400 CL52 2Rx8 Registered ECC specification

The decisive factor is the DDR5 6400 CL52 2Rx8 Registered ECC specification at 1.1V in 288-pin RDIMM form. This exact combination of speed, latency, rank, voltage and error correction determines whether the motherboard initialises all 192GB at rated performance. Verify your system manual for supported capacities and population rules before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $6,823.99
Pricier than about 83% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (6 × 32 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $35.54 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-328K6
Total capacity192 GB (6 × 32 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 6 × 32 GB DDR5 6400 MHz PC5-51200 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

What sustained-load limit appears first with this 192GB DDR5 6400 CL52 kit fully populated?

The registered ECC design keeps every slot stable at full capacity, so the first limit is the motherboard's maximum supported memory rather than a module constraint.

What noise, heat or power impact comes from six 1.10V RDIMMs running all day?

Each module operates at 1.10V with no heat spreader, so the kit adds minimal thermal load and draws only the power required for registered ECC operation.

What must my Supermicro H13SVW-N already have for this 6x32GB kit to work?

The board must support 288-pin DDR5 RDIMMs, accept 2Rx8 registered ECC modules at CL52, and allow 192GB total capacity across all populated slots.

More in Model-Specific Memory Upgrades

Similar items