We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 256GB (16x16GB) DDR5 4800 CL40 ECC RDIMM Cisco UCS X410c M7 memory upgrade

SKU CH-HV63-YS266

256GB DDR5 ECC registered server memory kit of sixteen 16GB modules at 4800MHz CL40 for Cisco UCS X410c M7

  • Total capacity256 GB (16 × 16 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeRegistered
  • Rated voltage1.1 V
  • 256 GB total capacity from 16 matched 16 GB modules
  • DDR5 4800 MT/s speed rated at PC5-38400
  • ECC registered RDIMM protects data integrity in servers
  • 1 V low-voltage operation reduces power draw
  • Validated for Cisco UCS X410c M7 compute nodes

Cisco UCS X410c M7 memory kit

This NEMIX RAM kit supplies 256GB across sixteen 16GB DDR5 4800 RDIMMs built for the Cisco UCS X410c M7 compute node. Each module is a 1Rx8 registered ECC part running at 1.10V with CL40 latency. The kit targets IT teams scaling memory capacity in validated Cisco server platforms.

Check DDR5 RDIMM slot count and maximum capacity

Verify that the X410c M7 has sixteen available 288-pin DDR5 RDIMM slots and that its firmware supports the full 256GB configuration at 4800 MT/s. Confirm the system accepts 1Rx8 registered ECC modules at 1.1V before ordering. Mixing ranks or voltages can prevent boot or reduce stability.

Suits Cisco UCS X410c M7 capacity upgrades

This kit fits administrators expanding a single compute node to its supported memory limit with matched modules. It is not for desktop PCs, laptops, or workstations that require unbuffered memory. Buyers needing non-ECC parts, lower capacities, or different form factors should look elsewhere.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $6,361.99
Pricier than about 82% of the 21,161 comparable items (median $397.99).
Total capacity 256 GB (16 × 16 GB)
Higher than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $24.85 per GB
Pricier than about 69% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineCisco Server Compatible Series Memory
Model nameCisco DDR5 4800 MHz ECC RDIMM Registered Server Memory
Part numberMR38400-618K16
Total capacity256 GB (16 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsCisco
In the box
Included items256 GB (16 × 16 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

What is included in the box and what must be purchased separately?

The kit contains sixteen 16GB DDR5 4800 CL40 ECC RDIMM modules for a total of 256GB; no cables, brackets or additional components are supplied and nothing else is required for installation.

Which capacity configuration should I choose for the Cisco UCS X410c M7?

This part number MR38400-618K16 delivers 256GB as sixteen 16GB single-rank modules, matching the compute node's maximum supported population.

What does the DDR5 4800 CL40 rating mean once the modules are installed in the server?

The memory will operate at 4800 MT/s with a CAS latency of 40 cycles at 1.10V, providing registered ECC error correction for stable server workloads.

More in Model-Specific Memory Upgrades

Similar items