We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR4 3200 CL22 288-Pin ECC RDIMM memory upgrade

SKU CH-T0AP-4QT7X

A 256 GB DDR4-3200 ECC registered server memory kit in a dual 128 GB module configuration

  • Total capacity256 GB (2 × 128 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • Massive 256GB capacity with two 128GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC registered design protects data integrity
  • Low 1.2V operation reduces power draw
  • Validated for Tyan Transport SX TS65-B8036 systems

256 GB DDR4 ECC RDIMM kit for Tyan servers

This registered DDR4 3200 kit supplies 256 GB across two 128 GB modules built for Tyan Transport SX TS65-B8036 systems. It targets IT teams running virtualisation clusters, database servers or high-density compute nodes that require ECC protection and registered signalling. The 4Rx4 organisation and CL22 latency suit workloads where capacity and data integrity outweigh raw frequency.

Sustained load behaviour

Registered buffering reduces electrical load on the memory controller, letting all sixteen ranks operate continuously at 3200 MT/s without the signal degradation seen on unbuffered DIMMs. ECC corrects single-bit errors on the fly, preventing silent data corruption during multi-day render jobs or scientific simulations. The 1.20 V operating voltage keeps power draw predictable inside dense 2U or 4U chassis where thermal headroom is limited.

Verify slot count and motherboard qualification list

Confirm the target board exposes enough 288-pin DDR4 RDIMM sockets to accept both 128 GB modules simultaneously. Cross-reference the Tyan qualified-vendor list for the exact TS65-B8036 revision to ensure 4Rx4 density is supported at the rated speed. Check that the BIOS version in use enables registered ECC operation and does not limit total capacity below 256 GB.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,879.99
Pricier than about 67% of the 21,161 comparable items (median $397.99).
Total capacity 256 GB (2 × 128 GB)
Higher than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $7.34 per GB
Cheaper than about 55% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTyan Server/Workstation Motherboard Compatible Series Memory
Model nameTyan DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-744K2
Total capacity256 GB (2 × 128 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank4Rx4
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTyan
In the box
Included items256 GB (2 × 128 GB) DDR4 3200 MHz PC4-25600 4Rx4 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How much power will the 1.2V 4Rx4 registered kit draw during sustained server workloads?

Each module operates at 1.20V DDR4 standard voltage; total system power depends on the platform memory controller and how many slots are populated.

What motherboard features are required for these 288-pin ECC RDIMMs to function?

The host must provide DDR4 RDIMM slots with registered ECC support and a qualified memory controller for 4Rx4 3200 modules.

Can the 3200 CL22 modules share channels with slower DDR4 ECC RDIMMs already present?

Mixed-speed populations are governed by the motherboard BIOS; the memory controller will typically clock all modules to the lowest common speed.

More in Model-Specific Memory Upgrades

Similar items