Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 256 GB DDR5 ECC registered memory kit with two 128 GB modules running at 5600 MT/s and CL46 latency for Dell PowerEdge XE9780L and XE9785L servers
This 256 GB kit contains two 128 GB DDR5 ECC RDIMMs built for Dell PowerEdge XE9780L and XE9785L rack servers. Registered buffering and on-die error correction protect data integrity in mission-critical workloads. The modules install in standard 288-pin DDR5 slots without proprietary connectors.
Each module operates at 1.10 V, keeping power draw low for dense server configurations. Passive operation relies on chassis airflow; no heat spreader is fitted. Registered design reduces electrical load on the memory controller during sustained throughput.
The 4Rx4 organisation packs maximum capacity per DIMM slot, but the memory controller must support quad-rank modules. Verify the server BIOS and CPU memory population rules before purchase; systems limited to dual-rank DIMMs cannot use this kit.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Server Memory |
| Model name | DDR5 ECC RDIMM Registered Server Memory |
| Part number | MR44800-744K2 |
| Total capacity | 256 GB (2 × 128 GB) |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 5600 (PC5 44800) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL46 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Dell |
| In the box | |
| Included items | 256 GB (2 × 128 GB) DDR5 5600 MHz PC5-44800 4Rx4 1.1 V 288-PIN ECC RDIMM KIT |
Power down the server, open the chassis, align each 288-pin DDR5 RDIMM with the slot key notch, press firmly until the ejector tabs click, then verify in BIOS that both 128 GB modules are recognised at 5600 MT/s.
The modules have no moving parts or heat spreaders; routine maintenance is limited to keeping server airflow clean. Replace a module only if ECC logs report uncorrectable errors on a specific DIMM.
The primary limit is the CL46 CAS latency at 5600 MT/s; sustained throughput is bounded by this timing rather than voltage or thermal throttling on the registered DIMMs.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?