Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
256 GB DDR5 registered ECC server memory kit with four 64 GB modules running at 4800 MT/s, CL40 and 1.10 V for Supermicro FatTwin SuperServer systems
This 256GB kit contains four 64GB DDR5 4800 CL40 registered ECC RDIMMs built for Supermicro FatTwin and SuperServer systems including the SYS-F521E3-RTB, SYS-F511E2-RT and X13SEFR-A. It targets IT teams expanding memory in validated server platforms where error correction and registered signalling are required.
Four matched modules populate four slots at once, delivering the full 256GB capacity with consistent 1.1V operation and CL40 timing across every rank. The 2Rx4 organisation and PC5-38400 rating keep bandwidth stable under sustained workloads, while on-board ECC corrects single-bit errors without software overhead.
Each 288-pin RDIMM seats in the standard DDR5 server slot; the key notch prevents misalignment and no heat spreader interferes with tight DIMM spacing. Systems that require specific population rules or BIOS revision updates for 64GB densities may need a firmware check before all four modules are recognised.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | SuperMicro Server/Workstation Compatible Series Memory |
| Model name | SuperMicro DDR5 4800 MHz ECC RDIMM Registered Server Memory |
| Part number | MR38400-924K4 |
| Total capacity | 256 GB (4 × 64 GB) |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 256 GB (4 × 64 GB) DDR5 4800 MHz PC5-38400 2Rx4 1.1 V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
No firmware is involved; the modules are standard 288-pin DDR5 RDIMMs that stay seated unless the chassis is moved.
The CL40 latency at 1.10 V sets the timing boundary before thermal or power limits appear.
With no heat spreaders and a low 1.10 V operating voltage, the modules add minimal heat and make no audible noise.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?