We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 256GB 4X64GB DDR5 5600MHz CL46 ECC Registered RDIMM memory upgrade for GIGABYTE MS34-CP0

SKU CH-NEQG-5NH9C

256GB kit of four 64GB DDR5 5600MHz CL46 ECC registered RDIMMs at 1.1V for GIGABYTE MS34-CP0 motherboards

  • Total capacity256 GB (4 × 64 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 256GB 4X64GB

Show 18 more
  • 256 GB total capacity for memory-intensive workloads using four 64 GB modules
  • DDR5 5600 speed matches the platform's rated data rate for full throughput
  • Registered ECC design corrects single-bit errors and buffers signals for stable full-population operation
  • 1 V operating voltage meets the DDR5 standard for lower power draw
  • 288-pin RDIMM form factor fits the GIGABYTE MS34-CP0 motherboard's memory slots

Exact-match server upgrade

This 256 GB kit delivers four 64 GB DDR5 5600 RDIMM modules tuned to CL46 at 1.1 V. It is built for administrators expanding the GIGABYTE MS34-CP0 platform with registered ECC memory that the controller recognises at full rated speed. The 2Rx4 organisation matches the board's population rules so every slot can be filled without down-clocking.

Registered ECC architecture

Registered buffering lightens the load on the onboard memory controller, allowing all four DIMM slots to operate at the specified 5600 MT/s. On-die ECC corrects single-bit errors in flight, protecting data integrity in workloads that cannot tolerate silent corruption. The 288-pin RDIMM form factor is the only module type this motherboard accepts; UDIMM or SODIMM variants will not seat.

Sustained-load stability

Continuous operation at 1.1 V keeps thermals predictable inside dense chassis where airflow is shared across many modules. The major-brand Samsung, Micron or Hynix DRAM behind each 2Rx4 die is qualified for 24/7 server duty cycles rather than short benchmark bursts. Lifetime replacement coverage and US-based technical support back the deployment long after installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $7,662.99
Pricier than about 84% of the 21,161 comparable items (median $397.99).
Total capacity 256 GB (4 × 64 GB)
Higher than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $29.93 per GB
Pricier than about 85% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-924K4
Total capacity256 GB (4 × 64 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items256 GB 4 × 64 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the CL46 latency hold steady when all four 64 GB modules run continuously?

The kit is specified at CL46 and 1.1 V; registered ECC RDIMM architecture keeps timing stable across all four slots under sustained load.

How much heat and power should I expect from a fully populated 256 GB kit running 24/7?

Each module operates at 1.1 V without a heat spreader; registered buffering reduces controller load, so total power draw stays low and passive airflow in a server chassis is sufficient.

Does the GIGABYTE MS34-CP0 motherboard need a specific BIOS revision or CPU to recognise this 2Rx4 RDIMM kit?

The kit is validated for the MS34-CP0 at DDR5-5600; consult the motherboard manual for approved DIMM population order and any BIOS update before installation.

More in Model-Specific Memory Upgrades

Similar items