We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 256GB (8x32GB) DDR4 2933MHz CL21 1.2V 288-pin UDIMM memory upgrade

SKU CH-FZKT-C8KQY

Eight 32 GB DDR4 UDIMM modules totalling 256 GB at 2933 MHz CL21 1.20 V for Supermicro systems

  • Total capacity256 GB (8 × 32 GB)
  • Rated speedDDR4 2933 (PC4 23400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL21
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 256GB total capacity across 8 modules of 32GB each
  • DDR4 2933MHz speed rated at PC4-23400 bandwidth
  • Low 1.2V operating voltage reduces power draw
  • CL21 CAS latency for responsive memory timing
  • Validated for Supermicro motherboards including MBD-C9X299-PGF

256GB DDR4 2933 kit for Supermicro workstations

This eight-module kit delivers 256GB of DDR4 2933 memory in matched 32GB UDIMMs. It is built for Supermicro C9X299-PGF motherboards used in desktop workstations and gaming systems. The non-ECC unbuffered design suits platforms that do not require registered or error-correcting modules.

Eight matched sticks simplify full population

Supplying eight identical 2Rx8 modules removes the guesswork of mixing capacities or ranks when filling all slots. The kit arrives pre-tested as a set so the memory controller sees consistent timing across every channel. No extra software or heat spreaders are included in the package.

Verify board slot count and maximum capacity

Confirm the motherboard has eight 288-pin DDR4 slots and supports 256GB total with 32GB UDIMMs at 2933 MT/s. Check that the BIOS recognises non-ECC unbuffered 2Rx8 modules at 1.20V. Systems limited to fewer slots or lower per-slot limits will not accept the full kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,358.99
Pricier than about 63% of the 21,161 comparable items (median $397.99).
Total capacity 256 GB (8 × 32 GB)
Higher than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $5.31 per GB
Cheaper than about 73% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineSuperMicro Server/Workstation Compatible Series Memory
Model nameSuperMicro DDR4 2933 MHz Non-ECC Unbuffered UDIMM
Part numberMD23400-328K8
Total capacity256 GB (8 × 32 GB)
Product type288-Pin DDR4 UDIMM
Performance
Rated speedDDR4 2933 (PC4 23400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL21
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsSupermicro
In the box
Included items256 GB (8 × 32 GB) DDR4 2933 MHz PC4-23400 2Rx8 1.2 V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

Will the 2Rx8 DDR4 modules require any firmware updates or component replacements over time?

The kit uses standard JEDEC DDR4 2933MHz CL21 1.2V unbuffered DIMMs with no heat spreaders; no firmware or scheduled part replacements are needed.

What limit appears first when all eight 32GB sticks run continuously at 2933MHz?

The motherboard's maximum supported memory capacity and available 288-pin slots set the hard ceiling for this 256GB configuration.

How much heat and power should I expect from the 1.2V DDR4 kit during all-day workloads?

Each module draws 1.20V at stock speed with no heat spreader, so thermal output stays within standard DDR4 limits for unbuffered UDIMMs.

More in Model-Specific Memory Upgrades

Similar items