We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 256GB 8x32GB DDR4 3200 CL22 ECC RDIMM 2Rx8 1.2V 288-Pin memory upgrade for ASUS WRX80 Creator R2.0

SKU CH-0VTE-J0N34

Eight registered DDR4 modules deliver 256 GB of ECC capacity at 3200 MT/s for the ASUS WRX80 Creator R2.0 workstation platform

  • Total capacity256 GB (8 × 32 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • 256GB total capacity from eight 32GB modules for large workloads
  • DDR4 3200 speed with CL22 latency for responsive data access
  • ECC registered RDIMM design protects data integrity in critical tasks
  • 2V operation reduces power draw while maintaining stability
  • Validated for ASUS WRX80 Creator R2.0 motherboard compatibility

Capacity and Purpose

This 256 GB kit provides eight 32 GB DDR4 3200 RDIMM modules for the ASUS WRX80 Creator R2.0 motherboard. ECC and registered buffering protect data integrity in server and workstation workloads. It targets IT professionals who need maximum supported memory capacity for virtualisation, rendering or large datasets. Builders using consumer boards or non-ECC platforms cannot use this memory.

Thermals and Power

Each module runs at 1.2 V with a CL22 latency rating and no heat spreader. Registered buffering reduces electrical load on the memory controller during sustained operation. Passive cooling relies on chassis airflow; the kit draws minimal power relative to total system budget. Systems with restricted airflow may require additional case fans to maintain stable temperatures.

Build and Connectors

The 288-pin RDIMM form factor uses major OEM Samsung, Micron or Hynix chips validated for the target motherboard. Eight modules populate all available slots on the WRX80 Creator R2.0, leaving no room for future expansion. Installers should follow the board manual for correct slot population order. Buyers needing more than 256 GB or a different form factor must choose another solution.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,250.99
Pricier than about 70% of the 21,161 comparable items (median $397.99).
Total capacity 256 GB (8 × 32 GB)
Higher than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $8.79 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineASUS Server Motherboard Compatible Series Memory
Model nameASUS DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-328K8
Total capacity256 GB (8 × 32 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsASUS
In the box
Included items256 GB (8 × 32 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How do I install the 288-Pin DDR4 RDIMM modules into the ASUS WRX80 Creator R2.0 motherboard, and which step is often missed?

Align each module's notch with the slot key, press down firmly until both retention clips click, and populate all eight channels for full bandwidth; the step most often missed is seating every clip fully on both sides.

What maintenance or replacement will the 256GB ECC RDIMM kit need over its service life?

No routine maintenance is required; ECC corrects single-bit errors on the fly, and modules are replaced only if a persistent multi-bit fault appears or a capacity upgrade is desired.

What limit appears first when the 3200 CL22 1.20V registered memory runs sustained workloads on the WRX80 platform?

The CAS-22 latency at DDR4-3200 becomes the bottleneck before voltage or thermal limits, capping sustained throughput on memory-bound tasks.

More in Model-Specific Memory Upgrades

Similar items