We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 288GB 6x48GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H14SST-GE memory upgrade

SKU CH-AS1Q-4T8KD

Six 48 GB DDR5 registered ECC modules running at 6400 MT/s with CL52 latency and 1.1 V for the Supermicro H14SST-GE server

  • Total capacity288 GB (6 × 48 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 288 GB total capacity for large workloads with six 48 GB modules
  • DDR5 6400 speed transfers data at PC5-51200 bandwidth
  • Registered ECC design corrects single-bit errors and buffers every slot
  • CL52 latency at 1.10 V keeps timing tight and power low
  • Verified fit for Supermicro H14SST-GE motherboard with 288-pin RDIMM form factor

Exact-match DDR5-6400 kit for Supermicro H14SST-GE

This 288GB kit contains six 48GB Registered ECC RDIMMs built to the board's required 2Rx8 rank structure and 1.1V operating voltage. Each module runs at DDR5-6400 (PC5-51200) with CL52 latency so the memory controller recognises the full capacity at rated speed. The 288-pin RDIMM form factor matches the slots on the H14SST-GE motherboard.

Sustained-load stability from registered ECC

Registered buffering reduces electrical load on the memory controller, allowing all six slots to stay fully populated at full frequency without signal degradation. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during continuous server workloads. The 1.1V default voltage keeps power draw consistent across long-running tasks.

2Rx8 rank layout is the decisive compatibility

The H14SST-GE memory population rules require this exact dual-rank x8 organisation; a different rank configuration will either not be recognised or will force the controller to down-clock the kit. Buyers whose boards call for 1Rx8 or 2Rx4 modules cannot use this kit. Verify the motherboard manual for approved DIMM population order before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $7,134.99
Pricier than about 83% of the 21,161 comparable items (median $397.99).
Total capacity 288 GB (6 × 48 GB)
Higher than about 81% of the 20,941 comparable items (median 32 GB).
Price per GB $24.77 per GB
Pricier than about 69% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-4828K6
Total capacity288 GB (6 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items288 GB 6 × 48 GB DDR5 6400 MHz PC5-51200 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

How much power does the 1.1V DDR5 6400 kit draw when the Supermicro H14SST-GE runs fully populated all day?

Each 48 GB module operates at 1.10 V DDR5 standard voltage; total draw depends on the board's memory-controller load and population rules, so consult the motherboard manual for exact figures.

What must the Supermicro H14SST-GE already have to accept this 6 x 48 GB 2Rx8 RDIMM kit?

The board needs six free 288-pin DDR5 RDIMM slots and a BIOS that supports 2Rx8 registered ECC modules at PC5-51200 CL52; verify the approved population order in the manual before installing.

Will these CL52 registered ECC modules run alongside any older DDR5 RDIMMs I keep in the same server?

Mixing ranks, speeds or latencies can force the memory controller to down-clock all slots; for stable operation populate every channel with identical 2Rx8 CL52 modules per the board's population guide.

More in Model-Specific Memory Upgrades

Similar items