We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 RDIMM sticks, bare chips, 288-pin, 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2400 CL17 ECC RDIMM Dell PowerEdge FC430

SKU CH-7A8A-TFXD2

32 GB DDR4 2400 ECC registered dual-rank kit for Dell PowerEdge FC430 servers

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL17
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • ECC protection guards data integrity in servers
  • Registered design stabilises heavy workloads on Dell PowerEdge FC430
  • 32 GB kit (2 × 16 GB) expands memory capacity
  • DDR4 2400 CL17 at 1.2 V balances speed and efficiency
  • Built with major OEM chips for reliable compatibility

32GB DDR4 ECC RDIMM Kit for PowerEdge FC430

This 32GB kit contains two 16GB DDR4 2400MHz registered DIMMs built with ECC for Dell PowerEdge FC430 servers. It operates at 1.2V with CL17 latency and uses a 1Rx4 rank configuration. The modules are designed for system-specific compatibility in enterprise environments.

Registered DDR4 limits bandwidth to 2400MHz

The registered buffer adds one clock cycle of latency but reduces electrical load on the memory controller, allowing higher capacities per channel. Maximum throughput is capped at the DDR4 2400 standard; faster DDR4 modules will downclock to this speed. ECC functionality requires a motherboard that supports error-correcting registered memory.

Tool-free installation into 288-pin slots takes

Align the notch on each module with the slot key and press firmly until the retention clips engage. The kit includes two identical sticks for dual-channel operation. Common issues arise when mixing registered and unbuffered DIMMs or when the BIOS is not updated to recognise the 1Rx4 density.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $161.99
Cheaper than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $5.06 per GB
Cheaper than about 76% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineDell Server/Workstation Compatible Series Memory
Model nameDell DDR4 2666 MHz ECC RDIMM Registered Server Memory
Part numberMR19200-614K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL17
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank1Rx4
Power
Rated voltage1.2 V
Compatibility
Compatible systemsDell
In the box
Included items32 GB (2 × 16 GB) DDR4 2400 MHz PC4-19200 1Rx4 1.2 V CL17 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Should I pick the 32 GB kit or a different capacity for my Dell PowerEdge FC430?

This kit provides 32 GB as two 16 GB modules, matching the FC430's dual-channel layout for balanced throughput.

What does the 2400 MT/s rating actually deliver once installed in the server?

The modules run at DDR4 2400 (PC4-19200) with CL17 latency, giving the bandwidth and timing the FC430's memory controller expects.

Is the 288-pin RDIMM interface fully compatible with the FC430's memory slots?

Yes, the 288-pin DDR4 RDIMM form factor with ECC and registered buffering is the exact standard the FC430 requires.

More in Model-Specific Memory Upgrades

Similar items