We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2666 ECC UDIMM Dell Precision 3930 Rack

SKU CH-44R2-5DFSJ

32 GB dual-channel DDR4 ECC UDIMM kit running at 2666 MHz with CL19 latency for Dell Precision 3930 Rack workstations

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR4 2666 (PC4 21300)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL19
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 32 GB dual-channel kit expands system memory
  • 2666 MHz DDR4 speed handles demanding workloads
  • ECC UDIMM design protects data integrity
  • 2 V operation reduces power draw
  • Validated for Dell Precision 3930 Rack compatibility

Dell Precision 3930 Rack Memory Kit

This 32 GB kit contains two 16 GB DDR4 2666 ECC unbuffered UDIMM modules built for the Dell Precision 3930 Rack workstation. Each stick runs at 1.2 V with CL19 latency and uses a 1Rx8 organisation. The modules are validated for that specific platform.

Thermals and Power

Standard DDR4 voltage of 1.2 V keeps power draw low during typical workloads. No heat spreader is fitted, so airflow in the chassis handles cooling without extra noise. ECC operation adds reliability without increasing thermal output.

Upgrade Scope

The kit replaces smaller-capacity DDR4 ECC UDIMMs in the Precision 3930 Rack when 32 GB is required. It is not suited for systems that need registered memory, non-ECC modules, or a different DDR generation. Builders needing more than two modules must look elsewhere.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $245.99
Cheaper than about 56% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $7.69 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineDell Server/Workstation Compatible Series Memory
Model nameDell DDR4 2666 MHz ECC Unbuffered UDIMM
Part numberME21300-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR4 ECC UDIMM
Performance
Rated speedDDR4 2666 (PC4 21300)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL19
ECC supportYes
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsDell
In the box
Included items32 GB (2 × 16 GB) DDR4 2666 MHz PC4-21300 1Rx8 1.2 V CL19 288-PIN ECC Unbuffered UDIMM KIT

Questions about this item

How do I install the 288-pin DDR4 ECC UDIMM modules in the Dell Precision 3930 Rack and what step is often missed?

Power off the workstation, open the chassis, align each module's notch with the slot key, press firmly until the retention clips click, then verify in BIOS that both 16GB modules show as 32GB total at 2666 MT/s with ECC enabled.

What maintenance or replacement will this 32GB DDR4 2666 ECC UDIMM kit need over its service life?

No scheduled maintenance is required; keep air vents clear so the modules stay at 1.20 V operating temperature, and replace only if a memory diagnostic reports uncorrectable ECC errors on either 1Rx8 rank.

What limit appears first when the kit runs sustained workloads at 2666 MT/s CL19?

The thermal envelope of the unbuffered 1.20 V modules without heat spreaders is the first constraint; prolonged heavy traffic can throttle throughput before the CL19 latency ceiling is reached.

More in Model-Specific Memory Upgrades

Similar items