We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 UDIMM sticks without heat spreaders, 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2933 CL21 1.2V 288-pin UDIMM memory upgrade

SKU CH-8N1R-Q14CT

A 32 GB DDR4 kit with two 16 GB UDIMMs running at 2933 MHz CL21 1.20 V for Supermicro boards

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR4 2933 (PC4 23400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL21
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 32 GB total capacity from two 16 GB modules
  • DDR4 2933 speed rated at PC4-23400
  • CL21 CAS latency for responsive timing
  • 2 V low-voltage operation saves power
  • Validated for Supermicro desktop and workstation boards

System Specific DDR4 Upgrade

This NEMIX RAM kit provides 32 GB of DDR4 memory in a matched pair of 16 GB UDIMMs. It is built for Supermicro desktop and workstation boards that accept non-ECC unbuffered modules at 2933 MT/s. The kit arrives new and ready to install.

Suits Supermicro DDR4 builds.

Builders upgrading a compatible Supermicro C9X299-PGF or similar platform can use this kit to reach 32 GB with CL21 timing at 1.20 V. Systems that require ECC, registered DIMMs, or a different DDR generation will not accept these modules.

2933 MT/s DDR4 UDIMM speed and form factor

The decisive specification is the DDR4 2933 (PC4-23400) rating in a 288-pin unbuffered UDIMM package. Only motherboards that support this exact speed, voltage, and non-ECC layout will run the kit at its rated settings.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $218.99
Cheaper than about 58% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $6.84 per GB
Cheaper than about 58% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineSuperMicro Server/Workstation Compatible Series Memory
Model nameSuperMicro DDR4 2933 MHz Non-ECC Unbuffered UDIMM
Part numberMD23400-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR4 UDIMM
Performance
Rated speedDDR4 2933 (PC4 23400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL21
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB (2 × 16 GB) DDR4 2933 MHz PC4-23400 1Rx8 1.2 V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

Should I choose the 2 x 16 GB kit or a single 32 GB module?

This product is only sold as a matched 2 x 16 GB kit; a single 32 GB module is not offered.

What does the 2933 MHz rating deliver in a Supermicro workstation?

It runs at DDR4 2933 with CL21 timing, providing the rated PC4-23400 bandwidth when the motherboard supports that speed.

Does the 288-pin DDR4 UDIMM interface limit capacity or speed?

The 288-pin UDIMM form factor accepts this 32 GB kit at 2933 MHz; higher capacities or speeds would need a different module type.

More in Model-Specific Memory Upgrades

Similar items