We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 2Rx8 1.2V ECC RDIMM THINKMATE Compatible

SKU CH-MT41-HKEB9

32 GB dual-channel DDR4-3200 ECC registered RDIMM kit validated for Thinkmate GPU-optimised servers

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • 32 GB capacity across two 16 GB modules for server workloads
  • DDR4 3200 speed with PC4-25600 bandwidth for data-intensive tasks
  • ECC registered RDIMM design detects and corrects memory errors
  • 2 V operation reduces power draw in dense configurations
  • Validated for ThinkMate GPU-optimised server platforms

Server-grade ECC RDIMM kit

This 32 GB kit contains two 16 GB DDR4-3200 registered DIMMs built with ECC for error correction in mission-critical workloads. The modules run at 1.2 V with a CAS latency of CL22 and use a 2Rx8 organisation. They are validated for ThinkMate GPU-optimised servers including the GPX-QN4-22E2-4NVLINK and GPX-QN12-24E2-10GPU platforms.

288-pin registered form factor

Each stick fits a standard 288-pin DDR4 RDIMM slot and requires a motherboard that supports registered ECC memory. The lack of a heat spreader keeps the profile low for dense multi-socket chassis. Registered buffering reduces electrical load on the memory controller, allowing larger total capacities in compatible ThinkMate systems.

Replaces non-ECC or slower DDR4

Upgrading from unbuffered non-ECC modules adds single-bit error correction and multi-bit detection for data integrity. Moving from lower-speed DDR4 to PC4-25600 raises peak bandwidth for GPU-accelerated compute. The jump is worthwhile when the server motherboard and BIOS explicitly support registered ECC at 3200 MT/s.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $224.99
Cheaper than about 57% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $7.03 per GB
Cheaper than about 57% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTHINKMATE Server/Workstation Compatible Series Memory
Model nameTHINKMATE DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-628K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTHINKMATE
In the box
Included items32 GB (2 × 16 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

What does the DDR4 3200 PC4-25600 interface cap at in practice?

The DDR4 3200 PC4-25600 interface runs at up to 3200 MT/s, delivering 25600 MB/s peak bandwidth per module.

What physical slot and clearance does this 288-pin RDIMM kit need?

It requires two DDR4 288-pin RDIMM slots; the modules have no heat spreader, so they fit under standard server CPU coolers.

How are these registered ECC modules installed, and what step is often missed?

Align the notch with the key, press firmly until both retention clips click, then enable ECC in the BIOS to activate error correction.

More in Model-Specific Memory Upgrades

Similar items