We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR4 RDIMM modules, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 ECC RDIMM THINKMATE QF4-14TP memory upgrade

SKU CH-BQES-TA5GA

Adds 32 GB of DDR4 3200 ECC registered memory in a matched 2×16 GB kit for ThinkMate QF4-14TP workstations

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • 32 GB dual-channel capacity for heavy workloads using two 16 GB modules
  • ECC registered design protects data integrity in mission-critical systems
  • DDR4 3200 speed with CL22 latency delivers responsive throughput
  • 2 V operation reduces power draw and thermal load
  • Validated for ThinkMate QF4-14TP workstations for guaranteed compatibility

ThinkMate QF4-14TP Compatible DDR4 ECC RDIMM Kit

This 32 GB kit provides two 16 GB DDR4 3200 registered DIMMs built for the ThinkMate QF4-14TP workstation. ECC error correction and registered buffering protect data integrity in server and workstation workloads. Modules run at 1.2 V with CL22 latency and use major OEM Samsung, Micron or Hynix chips. The 288-pin RDIMM form factor fits the qualified platform.

Installation and Common Issues

The kit installs in standard DDR4 RDIMM slots and typically takes minutes to seat both modules. Systems that require registered memory will not boot with unbuffered DIMMs, so verify the platform supports ECC RDIMMs before purchase. Mixing these registered sticks with non-ECC or unregistered modules can prevent POST or disable error-correction features.

DDR4 RDIMM Platform Limits

DDR4 RDIMM memory tops out at the JEDEC-defined speeds and voltages for the generation; this kit operates at 3200 MT/s and 1.2 V within those bounds. Registered buffering adds one clock cycle of latency compared with unbuffered DIMMs, which slightly reduces raw bandwidth for single-threaded tasks. Total capacity is limited to the number of slots and the maximum density the ThinkMate QF4-14TP motherboard and CPU memory controller officially support.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $229.99
Cheaper than about 57% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $7.19 per GB
Cheaper than about 56% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTHINKMATE Server/Workstation Compatible Series Memory
Model nameTHINKMATE DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-628K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTHINKMATE
In the box
Included items32 GB (2 × 16 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How can I confirm the DDR4 3200 CL22 ECC RDIMM kit is running at the correct speed and timings after installation?

Enter the system BIOS or UEFI and verify the memory frequency reads 3200 MT/s with CAS latency 22; the registered ECC modules should also report 1.20 V and 2Rx8 organisation.

What comes in the package and are any extra components required for installation in a Thinkmate QF4-14TP?

The box contains two 16 GB 288-pin DDR4 RDIMM modules totalling 32 GB; no additional brackets, cables or heat spreaders are needed for the compatible workstation.

Which capacity kit should I choose if my Thinkmate QF4-14TP has four memory slots and I want 32 GB total?

Select this 32 GB kit (2 x 16 GB) to populate two slots with 2Rx8 registered ECC modules, leaving the remaining two slots free for future expansion.

More in Model-Specific Memory Upgrades

Similar items