Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 32GB dual-channel DDR4 ECC UDIMM kit running at 3200 MT/s with CL22 latency for SuperMicro systems
This NEMIX RAM kit provides 32 GB of DDR4 3200 ECC UDIMM memory across two 16 GB modules. It is built for SuperMicro B3ST1-CPU-001 systems that require error-correcting unbuffered DIMMs. The modules run at 1.20 V with CL22 timing and use 2Rx8 organisation. They are suited for administrators upgrading compatible SuperMicro servers or workstations.
Buyers whose motherboards only accept non-ECC unbuffered memory cannot use this kit because the modules implement ECC. Systems that require registered or load-reduced DIMMs are also incompatible with these unbuffered sticks. Anyone needing capacities beyond 32 GB or speeds above DDR4 3200 should look at other configurations.
Installation consists of aligning each 288-pin module with the slot key and pressing until the retention clips engage. The kit ships without heat spreaders, so clearance around tall CPU coolers is rarely an issue. The most common mistake is mixing these ECC UDIMMs with non-ECC or registered modules, which prevents the system from posting. Always populate slots per the motherboard manual for the correct channel configuration.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | SuperMicro Server/Workstation Compatible Series Memory |
| Model name | SuperMicro DDR4 3200 MHz ECC Unbuffered UDIMM |
| Part number | ME25600-628K2 |
| Total capacity | 32 GB (2 × 16 GB) |
| Product type | 288-Pin DDR4 ECC UDIMM |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 32 GB (2 × 16 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 288-PIN ECC Unbuffered UDIMM KIT |
The kit is validated for the SuperMicro B3ST1-CPU-001 motherboard; the board must provide 288-pin DDR4 slots that accept unbuffered ECC modules at 1.20 V.
Mixing ECC and non-ECC DIMMs on the same board typically disables ECC and forces both sets to run at the lowest common speed and voltage.
Check the BIOS memory information or a tool such as CPU-Z; it should report 3200 MT/s, CL22 timings, 1.20 V and ECC active.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?