We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 ECC RDIMM CL22 1Rx8 1.2V 288-pin Supermicro 510P-M/MR compatible

SKU CH-PS59-996K4

A 32 GB DDR4 ECC registered kit running at 3200 MHz with CL22 latency for Supermicro 510P-M and 510P-MR servers

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on dense server boards
  • DDR4 3200 speed delivers high throughput for demanding applications
  • 2 V operation reduces power draw and heat output
  • Validated for Supermicro 510P-M and 510P-MR systems

ECC Registered DDR4 Kit

This 32 GB kit contains two 16 GB DDR4 3200 modules built for registered server platforms. ECC and registered buffering protect data integrity in workloads that cannot tolerate silent corruption. The 1Rx8 organisation and CL22 timing match the specifications validated for Supermicro 510P-M and 510P-MR systems.

288-Pin RDIMM Form Factor

Each module uses the standard 288-pin DDR4 RDIMM connector and operates at 1.2 V without a heat spreader. Registered signalling reduces electrical load on the memory controller, allowing stable operation in multi-DIMM server boards. The low-profile design fits dense chassis where taller heat spreaders would interfere with airflow or adjacent components.

DDR4 3200 Bandwidth Limit

The PC4-25600 interface caps maximum throughput at the rated 3200 MT/s, so workloads needing higher memory bandwidth will hit this ceiling. Registered DIMMs cannot be used in consumer desktop boards that expect unbuffered modules. Capacity is fixed at 32 GB across the two modules, so expansion requires additional DIMM slots and matching registered ECC kits.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $222.99
Cheaper than about 57% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $6.97 per GB
Cheaper than about 57% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTHINKMATE Server/Workstation Compatible Series Memory
Model nameSuperMicro DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTHINKMATE
In the box
Included items32 GB (2 × 16 GB) DDR4 3200 MHz PC4-25600 1Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

What DDR4 speed and PC4 rating does this 3200 kit use?

The kit runs at DDR4 3200 with a PC4-25600 data rate and CL22 latency.

Will these 288-pin RDIMMs fit in a Supermicro 510P-M or 510P-MR server?

The modules are 288-pin DDR4 RDIMMs validated for the Supermicro 510P-M and 510P-MR platforms.

Do I need to install both 16 GB sticks together for registered ECC operation?

Install the pair in matching DIMM slots per the server manual; registered ECC requires identical modules in the correct channels.

More in Model-Specific Memory Upgrades

Similar items