We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM sticks, no heat spreaders, 288 pins, 32 GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 ECC RDIMM for Dell PowerEdge XR5610

SKU CH-WMTK-8T0YQ

32 GB DDR5 4800 CL40 ECC registered DIMM kit (2×16 GB) validated for Dell PowerEdge XR5610

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeRegistered
  • Rated voltage1.1 V
  • ECC protection guards data integrity in critical workloads
  • Registered design stabilises signal for dense server configurations
  • 32 GB kit (2 × 16 GB) expands capacity for virtualisation and databases
  • DDR5 4800 CL40 at 1.10 V balances throughput and power efficiency
  • Validated for Dell PowerEdge XR5610 rack servers

Dell PowerEdge XR5610 Compatible Memory Kit

This NEMIX RAM kit provides 32GB of DDR5 4800 registered ECC memory in two 16GB modules. It is built for the Dell PowerEdge XR5610 rack server and uses 1Rx8 organisation at 1.1V. The modules are validated for mission-critical workloads requiring error correction and registered signalling.

IT Teams Maintaining Qualified Dell Platforms

The kit suits administrators who need a tested, system-specific upgrade for the PowerEdge XR5610 and want ECC RDIMM reliability. It is not for builders using consumer motherboards, laptops or workstations that require unbuffered non-ECC DDR5 or different pinouts and voltage profiles.

Two Matched 16GB RDIMMs Ready to Install

The package contains a matched pair of 288-pin registered DIMMs with CL40 latency and PC5-38400 speed rating. No heat spreaders are included, and no additional software or configuration utilities are bundled. The modules arrive ready for direct insertion into the qualified server slots.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $929.99
Pricier than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $29.06 per GB
Pricier than about 82% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineDell Server/Workstation Compatible Series Memory
Model nameDell DDR5 4800 MHz ECC RDIMM Registered Server Memory
Part numberMR38400-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsDell
In the box
Included items32 GB (2 × 16 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

My PowerEdge XR5610 currently runs DDR5 4800 RDIMMs — will this 32 GB kit work alongside them?

Yes, the kit matches the server's DDR5 4800 speed, 1.10 V voltage, 288-pin RDIMM form factor and CL40 timing so it can populate the remaining slots without speed or voltage mismatch.

After installing both 16 GB modules, how do I confirm the XR5610 sees the full 32 GB at 4800 MT/s with ECC active?

Enter the system BIOS or run a memory diagnostic; it should report 32 GB total, DDR5 4800 (PC5-38400), CL40 and ECC enabled.

More in Model-Specific Memory Upgrades

Similar items