We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V UDIMM memory upgrade for Dell Alienware Aurora R16

SKU CH-RDM4-8RTRJ

DDR5 5600 UDIMM kit adds 32 GB in two 16 GB modules at CL46 and 1.1 V for the Dell Alienware Aurora R16

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 32 GB kit expands system capacity with two 16 GB modules
  • DDR5 5600 speed delivers high data throughput at PC5-44800
  • CL46 latency supports responsive operation at 1.1 V
  • 288-pin UDIMM form factor fits Alienware Aurora R16 slots
  • Samsung Micron Hynix chips provide reliable non-ECC unbuffered performance

32GB DDR5 kit for Alienware Aurora R16

This 32GB kit contains two 16GB DDR5 UDIMM modules rated at 5600MHz with CL46 latency. It is built specifically for the Dell Alienware Aurora R16 desktop and runs at the standard 1.10V voltage.

Suits owners adding 32GB to a compatible Aurora R16

The kit targets users who want a straightforward capacity increase for the named system. It is not ECC memory, so buyers who require error correction for server workloads should look elsewhere. The modules lack a heat spreader, which may limit appeal for enthusiasts seeking thermal headroom for manual overclocking.

Handles mainstream multitasking

Two 1Rx8 ranks provide 32GB of bandwidth at PC5-44800 without voltage adjustment. The CL46 timing delivers stock JEDEC performance for everyday workloads. Headroom ends at the rated frequency and latency; the kit does not support XMP profiles or higher data rates beyond the 5600MHz specification.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $423.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $13.25 per GB
Pricier than about 60% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineDell Server/Workstation Compatible Series Memory
Model nameDell DDR5 5600 MHz Non-ECC Unbuffered UDIMM
Part numberMD44800-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsDell
In the box
Included items32 GB (2 × 16 GB) DDR5 5600 MHz PC5-44800 1Rx8 1.1 V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

Does the Aurora R16 need four free DDR5 slots to install this 32 GB kit?

The kit contains two 16 GB modules, so only two free 288-pin DDR5 UDIMM slots are required.

Will the 5600 MHz modules down-clock automatically if the Aurora R16 motherboard only supports a lower DDR5 speed?

Yes, DDR5 UDIMMs negotiate the highest common speed with the memory controller, so they will run at the board's maximum supported rate.

How can I confirm the system is running the new memory at 5600 MT/s with CL46 timings after installation?

Open Task Manager's Performance tab or run CPU-Z and verify the speed reads 5600 MT/s and the CAS latency shows 46.

More in Model-Specific Memory Upgrades

Similar items