We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black chips and gold contacts lying side by side

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600MHz CL46 1.1V UDIMM for Supermicro X13SAQ

SKU CH-RZP0-4E6BD

A 32 GB DDR5 kit with two 16 GB UDIMMs running at 5600 MHz CL46 1.1 V, validated for the Supermicro X13SAQ motherboard

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 32GB 2X16GB

  • 32 GB dual-channel kit expands memory capacity for demanding workloads
  • DDR5 5600 MHz speed delivers high bandwidth for responsive performance
  • CL46 latency at 1.1 V ensures efficient operation within spec
  • 288-pin UDIMM form factor matches Supermicro X13SAQ motherboard requirements
  • Major OEM DRAM chips from Samsung, Micron or Hynix provide tested reliability

Exact DDR5 5600 upgrade for Supermicro X13SAQ

This 32 GB kit contains two 16 GB UDIMM modules built to the DDR5 5600 standard. It matches the non-ECC unbuffered layout and 1.1 V operating voltage the X13SAQ memory controller expects so the system recognises the full capacity at rated speed.

Standard JEDEC voltage keeps thermals and power low

Running at the specified 1.1 V means the modules draw only the power defined for DDR5 5600 operation. No heat spreader is fitted so airflow in a typical desktop chassis handles the thermal load without extra fan noise.

Replaces slower or smaller DDR5 kits

The jump is worth it if your current memory runs at a lower data rate or provides less than 32 GB total. Buyers who need ECC registered DIMMs or a different form factor cannot use this kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $423.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $13.25 per GB
Pricier than about 60% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB 2 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 288-pin DDR5 UDIMM modules on the Supermicro X13SAQ, and which step is often missed?

Align the notch on each 288-pin module with the slot key, press firmly until both side clips click shut, then verify in BIOS that both 16GB sticks are detected at 5600MHz; the step most often missed is checking the motherboard manual for the correct DIMM population order before seating the modules.

What maintenance or replacement will the 32GB DDR5 5600MHz kit need over its service life?

The modules have no heat spreader and no moving parts, so no routine maintenance is required; if a stick fails, the lifetime replacement warranty covers a direct swap of the defective 16GB module.

What limit appears first when the 1.1V CL46 DDR5 memory runs under sustained heavy workloads?

The primary limit is the CL46 latency at 5600MHz; without a heat spreader, prolonged high utilisation can raise module temperatures, which may cause the memory controller to throttle speed to maintain stability.

More in Model-Specific Memory Upgrades

Similar items