We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green circuit boards with black chips and gold contacts

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2933 CL21 ECC UDIMM memory upgrade

SKU CH-PPZZ-RD1EW

32 GB kit of four 8 GB DDR4 2933 ECC UDIMMs at 1.2 V CL21 for Supermicro X12SCZ boards

  • Total capacity32 GB (4 × 8 GB)
  • Rated speedDDR4 2933 (PC4 23400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL21
  • Rated voltage1.2 V
  • Buffer typeUnbuffered

Size 32GB 4X8GB

  • 32 GB kit adds capacity for demanding workloads using four 8 GB modules
  • ECC detects and corrects single-bit errors on the fly to prevent data corruption
  • DDR4-2933 CL21 timing matches the memory controller for full-speed operation
  • 2 V unbuffered UDIMM fits Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards exactly
  • 288-pin 1Rx8 form factor follows the board's population rules for reliable recognition

Kit specifications

This NEMIX RAM kit provides 32 GB of DDR4 ECC memory in a matched set of four 8 GB modules. Each UDIMM runs at 2933 MT/s with CL21 latency at 1.20 V. The 1Rx8 unbuffered design matches the electrical requirements of the target platform.

Intended use and limits

Builders upgrading a Supermicro X12SCZ-F or X12SCZ-TLN4F motherboard with DDR4 2933 ECC support will find this kit validated for those boards. Systems that require registered DIMMs, SODIMMs, non-ECC memory, or a different DDR generation cannot use these modules.

Deciding specification

The 288-pin unbuffered ECC UDIMM form factor is the single attribute that determines whether this kit fits your motherboard. Only boards designed for DDR4 ECC UDIMMs at this pin count will accept it.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $275.99
Cheaper than about 55% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (4 × 8 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $8.62 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR4 ECC Unbuffered UDIMM Memory
Part numberME23400-818K4
Total capacity32 GB (4 × 8 GB)
Product type288-Pin DDR4 ECC UDIMM
Performance
Rated speedDDR4 2933 (PC4 23400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL21
ECC supportYes
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB 4 × 8 GB DDR4 2933 MHz PC4-23400 1Rx8 1.2 V 288-PIN ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I pick the 32 GB four-stick kit or a different capacity?

This kit provides exactly 32 GB in four 8 GB modules, matching the Supermicro X12SCZ-F and X12SCZ-TLN4F population rules for full-channel operation.

What does the DDR4-2933 rating deliver inside those Supermicro boards?

The modules run at 2933 MT/s with CL21 latency at 1.20 V, giving the memory controller the exact timing and voltage it expects for stable ECC operation.

How does the 288-pin UDIMM ECC interface limit performance?

The unbuffered 288-pin DDR4 ECC form factor caps you to the board's native DDR4-2933 speed and single-rank 1Rx8 organisation; registered DIMMs or other speeds are not supported.

More in Model-Specific Memory Upgrades

Similar items